Just another WordPress weblog

Outdoor Wood Furnace Boiler Brazed Plate Heat Exchanger 30 Plate Small/BEER WORT


30 plate Heat Exchanger. This unit can be used in many applications including outdoor wood boilers, hot water recirculation systems, snow melt, solar systems, beer wort, bio diesel, and many other applications. These are not meant for heating a home. Overall dimensions: 3″ wide, 7.5″ long with 3/4 threaded nipples. Maximum pressure is 435. Maximum temperature is 392 degrees Fahrenheit. This is the best quality on the market fo. R better efficiency and longer life. Item may not be an expired listing. Over 10 years experience! This is all we do, so give us a call and let our knowledgeable staff help you get your project done right! This unit comes with a lifetime waranty against manufacturers defects. A copy can be obtained by written request to. Andersons Outdoor Wood Furnace Center. UPS ground 2-3 days. Fully insured and properly boxed. To insure safe arrival at your home. We offer service even after the sale! 7 days a week! This is all we do, so give us a call and let our knowledgeable staff help you. Tired of talking to dealers and sellers who don’t even know their own products? Our feedback is earned! We just want to take the time to thank your for the opportunity to service you and your project! We enjoy answering questions and helping your project run a little smoother! The item “Outdoor Wood Furnace Boiler Brazed Plate Heat Exchanger 30 Plate Small/BEER WORT” is in sale since Monday, February 6, 2017. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\Furnaces & Central Heating Systems”. The seller is “freeheat4u” and is located in Plymouth, Wisconsin. This item can be shipped worldwide.

  • Model: 30 PLATE SMALL
  • Power Source: Wood
  • Outlet Size: 3/4
  • Material: 316 Stainless Steel
  • Brand: American Royal
  • MPN: 30 PLATE HEAT EXCHANGER 3/4″ FITTINGS
Outdoor Wood Furnace Boiler HEAT EXCHANGER WithBlower 269,000 BTU AIR HANDLER


Outdoor Wood Furnace Boiler HEAT EXCHANGER WithBlower 269,000 BTU AIR HANDLER


Outdoor Wood Furnace Boiler HEAT EXCHANGER WithBlower 269,000 BTU AIR HANDLER


MODINE STYLE HEAT EXCHANGER. 22 X 25 COIL MEASUREMENT. Perfect for heating your shop, garage, or greenhouse. Can be hung for laid on a bench or floor. The heat exchangers used for these are heavy duty units. The fins are quality. 006 aluminum, 12 fins per inch. The inner copper tubing is 3/8 3 row pass, and the outer casing is 20 gauge. The feed and return lines are 1, but can be reduced or increased to fit your system. Fans are 3 speed, 1/2hp with 1075 RPM, 115 voltage and 5.1 amp. HAS A 3 SPEED BLOWER FAN WITH 580 CFM ON LOW AND 1578 CFM ON HIGH, AND 269,000 BTU OUTPUT. THIS CAN BE HUNG OR LAID ON A BENCH OR FLOOR. IDEAL FOR HEATING THAT GARAGE OR SHOP. The item “Outdoor Wood Furnace Boiler HEAT EXCHANGER WithBlower 269,000 BTU AIR HANDLER” is in sale since Thursday, January 18, 2018. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\Furnaces & Central Heating Systems”. The seller is “freeheat4u” and is located in Plymouth, Wisconsin. This item can be shipped to United States.

  • Model: Modine 22×25 Shop Air Handler
  • Power Source: Wood
  • Brand: American Royal
  • MPN: Does Not Apply
Outdoor Wood Furnace Boiler Water to Air Heat Exchanger 20X20 american royal


20X20 HEAT EXCHANGER THE METAL AROUND THE COIL IS 20X22X3 1/2 SIZE 169,000 BTU IMPORT. INCLUDES FREE FIN COMB IN CASE YOU DAMAGE THE ALUMINUM FINS. TWO WARRANTIES TO PROTECT YOUR INVESTMENT. INCLUDES MOUNTING BOX AROUND THE COIL FOR EASE OF INSTALLATION. WELL WE TELL YOU HOW IT IS WITHOUT LIES AND DO NOT LIE OR HIDE BEHIND SMOKE AND MIRRORS TO SELL YOU ITEMS THAT ARE NOT AS YOU ARE LED TO BELIEVE. THE DIFFERENCE IS WE DONT PLAY THOSE GAMES THIS EXCHANGER IS MADE IN CHINA. WE NOW OFFER BOTH EXCHANGERS AT DIFFERENT PRICES AND LET THE CUSTOMER DECIDE WHAT THEY WANT. INCLUDES MOUNTING BOX AROUND THE COIL FOR EASE OF INSTALLATION you asked for it now here it is. The item “Outdoor Wood Furnace Boiler Water to Air Heat Exchanger 20X20 american royal” is in sale since Monday, January 16, 2017. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\HVAC Parts & Accessories”. The seller is “freeheat4u” and is located in Plymouth, Wisconsin. This item can be shipped to North, South, or Latin America, all countries in Europe.

  • System: 3 Row Pass
  • Overall Dimensions: 20X22 FIN AREA NOT INCUDING MANIFOLD
  • Port Size: 1″
  • MPN: Does Not Apply
  • Brand: american royal
  • Model: AM20X20
  • Country of Manufacture: CHINA
  • BTU: 169000
Outdoor Wood Furnace Boiler INSULATED PEX /REHAU 250FT 5 WRAP 1


Outdoor Wood Furnace Boiler INSULATED PEX /REHAU 250FT 5 WRAP 1


Outdoor Wood Furnace Boiler INSULATED PEX /REHAU 250FT 5 WRAP 1


Thank you for your interest in our 250 ft roll NOW WITH COLOR CODED PEX PIPE INSIDE 1 BLUE 1 WHITE. All new 5 WRAP PEX I HAVE SPREAD THE TUBES IN THE PHOTO SO YOU CAN SEE THE INSULATION BETWEEN THE PIPES. Our Rheau R18 pex and microfoil. Insulation is wrapped so it separates the 2 Rehau pex tubes. This eliminates heat transfer from one line to the other. Insulation is much better than the 3 and 5 wrap others use. We could save 40 cents per foot using the competitions cheaper insulation but we feel that the insulation is the most important part of the product and refuse to forgo quality for price. We use Rehau class (A) pex tubing. Rheau pex is expandable other pex pipe is not expandable. This means if the pex freezes under the ground or above then it will not crack or split. Others say the pex they sell is not expandable but will not crack if frozen!!!! . I have never seen water freeze and not expand. The drain tile we use is made just for this type of product. It is made thicker and slower to help eliminate BLOWOUTS in the drain tile therefore helping to eliminating problems for customers. Folks we do not put an electrical wire inside of our pipe. If the electrical line did fail it would electrify the house and could cause fire or possible injury. The electrical line inside the pipe is not code and would not be safe to install that way. Others say they are a USA mfg. We use Rehau pex pipe made in the USA. We use drain tile made in the USA We use Microfoil insulation made in the USA. We put all the parts together in the USA. NOW IT DOES NOT GET ANY MORE USA MADE THAN THAT. Our superior American Royal pipe consist of two class A (Rehau or Wirsbo) 1 inch pex tubes wrapped in our premium quad wrap insulation that is then pre-assembeled in our protective 4 inch waterproof drain tile. The two pex lines are coded for ease in telling the difference between the two. Our pipe insulation is. Made from our high quality microfoil invented by. NASA , not the cheaper bubble wrap or low E insulation that others use. That is about 1 degrees of heat loss per 150ft of tubing. One of the best values. Ours does NOT have a string in it to pull the electric wire through. Water and electric does NOT mix! By putting your electrical wire through the same tubing as the water lines, you are endangering yourself in case of a short in the wire as it will electrify your water in the line. This can cause a. Fire or even death! Our line is expandable! Others may tell you that the pipe they sell is not expandable and will not crack if frozen. Have you ever seen water freeze and not expand? Decide for yourself if the wool is being pulled over your eyes! Beware of cheaper grades of pipe! The inside pipe of this product is class A pex for portable water. Many towns and building inspectors will not approve anything but Class A for underground applications! If you are looking at pipe that is not expandable and can only be used with crimp fittings, or that does not have Class A printed on the pipe, it’s more than likely NOT pex Class (A) for potable water and a cheaper quality! Inside 1 inch ID Pex lines. Are made from REHAU. WIRSBO , two of the. Top quality lines on the market! Our customers do NOT have a choice of the brand it depends of availability between these two lines but both are equally superior. If the inside pipe freezes and cracks. We will replace it at no charge. No other company makes this offer! Our pipe can freeze solid without breaking where others can not! 7 days a week! Contact our knowledgeable staff for any questions or concerns. We would be delighted to answer any questions you may have! We just want to take the time to thank your for the opportunity to service you and your project! We enjoy answering questions and helping your project run a little smoother! The item “Outdoor Wood Furnace Boiler INSULATED PEX /REHAU 250FT 5 WRAP 1″ is in sale since Tuesday, April 30, 2013. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\HVAC Parts & Accessories”. The seller is “freeheat4u” and is located in Plymouth, Wisconsin. This item can be shipped to United States, Canada.

  • MPN: Insulated pex tubing / 250 ft 1″
  • Brand: Rehau
  • Shipping: Must ship to commercial business w/no home see ad
  • Residential?: Available for additional $70 must call in payment
  • Model: INSULATED OUTSIDE LINE NEW 5WR
Outdoor Wood Furnace Boiler Brazed Plate Heat Exchanger 20 Plate 1 INCH FITTINGS


IT ALSO MAKE THE PORTS SO CLOSE TOGETHER THAT IT IS VERY HARD TO PUT A FITTING ON THEM!!! 20 Plate Heat Exchanger with 1 Threaded Nipples. Our superior brazed plate style water to water heat exchanger features 316 stainless steel and is UL listed. For use with outdoor wood boilers, hot water recirculation systems, snow melt, solar systems, and many other applications. Our large style 20 plate is 12 long! Don’t be fooled by smaller units and don’t settle for less quality! Units, NOT the cheaper 304 Stainless Steel! Overall dimensions: 5″ wide, 12″ long with 1 threaded (MPT) nipples. Maximum Temperature: 437 degrees Fahrenheit. The feed and return is 1 MPT. TECHNICAL DATA: Type: Brazed Plate Heat Exchanger Plate Material: ASTM 316L Stainless Steel Dimensions: 12″ long x5″ wide (see the photo below for reference: a x b sizes respectively) Outlet sizes: 1 Male IPS (MPT) threaded nipples, ASTM standard Min. Operating temperature: -256 F Max. Operating temperature: 437 F Max. Design pressure: 435 psi. The most important thing is the length and width of the heat exchanger. Ours are 12 inches. This is important as it has the most heat transfer area. Sizing is not just about the amount of plates, but also the area for heat transfer! The port size is important! This will decrease water flow to the rest of your system. Ours are 1 inch! Make sure you properly size your heat exchanger. Here is a guide based on the larger 12 exchangers. Others may not be there to service you down the road. Below is a guide to help you. It is always better to have more than enough heat, than not enough! Again, all items above are based on a 12″ length and 1″ ports. 10 plates are used for domestic hot water or small in-floor heating. Applications of less than 1100 sq ft. These will work with the largest of. Domestic hot water systems and should never need to be larger unless you. Use your domestic hot water for more than 3 hours straight at one time. 20 Plates are used for smaller homes from 1100 – 2500 sq ft. 40 Plates are used for larger homes from 2500 – 4500 sq. 70 Plates are used for areas 5000 – 7000 sq ft. This is the best quality on the market for. Better efficiency and longer life. Item may not be an expired listing. Over 10 years experience! This unit comes with a lifetime waranty against manufacturers defects. UPS ground 2-3 days. Fully insured and properly boxed. To insure safe arrival at your home. We offer service even after the sale! 7 days a week! Tired of talking to dealers and sellers who don’t even know their own products? Unlike others, we service what we sell! Our feedback is earned! We just want to take the time to thank your for the opportunity to service you and your project! We enjoy answering questions and helping your project run a little smoother! The item “Outdoor Wood Furnace Boiler Brazed Plate Heat Exchanger 20 Plate 1 INCH FITTINGS” is in sale since Monday, February 6, 2017. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\Furnaces & Central Heating Systems”. The seller is “freeheat4u” and is located in Campbellsport, Wisconsin. This item can be shipped worldwide.

  • Outlet Size:: 1″
  • Power Source: Wood
  • MPN: Does Not Apply
  • Brand: American Royal
  • Model: 20PLATE LARGE
  • Material:: 316 Stainless Steel
Outdoor Wood Furnace Boiler Stainless Steel Pool Heat Exchanger 55,000 BTU


YOU DO NOT WANT PORTS ON SAME SIDE AS THE WATER TENDS TO TAKE THE PATH OF LEAST RESISTANCE AND ONLY FLOW THOUGH PART OF THE HEAT EXCHANGER. PORTS ON DIFFERENT SIDES MAKES THE WATER FLOW THROUGH ENTIRE HEAT EXCHANGER FOR BETTER HEAT TRANSFER. 55,000 BTU Stainless Steel Pool/ Hot Tub heat exchanger. For the hook up kit search for this item number. This unit is especially made for chlorinated pools. This is the best quality on the market for better efficiency and longer life. If you have a SALT WATER pool, please see our TITANIUM pool exchanger listings. This unit has 3/4″ ports on the stove side and 1″ ports on the pool side. These can be easily increased or decreased with a fitting to fit your project. The length of this unit is about 18 inches. Listed below is a basic sizing chart. Use this table to determine which pool heat exchanger best suits your pool needs. Pool Capacity (US GAL). Shell Side Tube side. Construction Material: SS-316L SS-316L. Working Pressure 150 150. Minimum Temperature 18 18. Maximum Temperature 250 250. Pneumatic Test Pressure 165 165. Tube Side (FNPT) Shell Side (FNPT). All parameters are subject to change without prior notice. Designed according to ASME boiler and pressure vessel code SECC VII version 1. Andersons Outdoor Wood Furnace Center. We offer service even after the sale! 7 days a week! Over 10 years experience! This is all we do, so give us a call and let our knowledgeable staff help you. Tired of talking to dealers and sellers who don’t even know their own products? Unlike others, we service what we sell! Our feedback is earned! All others must call for a quote. We just want to take the time to thank your for the opportunity to service you and your project! We enjoy answering questions and helping your project run a little smoother! The item “Outdoor Wood Furnace Boiler Stainless Steel Pool Heat Exchanger 55,000 BTU” is in sale since Tuesday, April 30, 2013. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\Furnaces & Central Heating Systems”. The seller is “freeheat4u” and is located in Plymouth, Wisconsin. This item can be shipped worldwide.

  • Model: Pool 55000 SPLASH BTU
  • Pool Type: Chlorinated
  • Brand: American Royal
  • MPN: 55K Stainless Steel
Outdoor Wood Furnace Boiler swimming Pool & spa electronics hook up kit hot tub


THIS PKG WILL WORK WITH ANY STYLE POOL HEAT EXCHANGER. We offer service even after the sale! 7 days a week! Over 10 years experience! This is all we do, so give us a call and let our knowledgeable staff help you. Tired of talking to dealers and sellers who don’t even know their own products? Unlike others, we service what we sell! Our feedback is earned! All others must call for a quote. We just want to take the time to thank your for the opportunity to service you and your project! We enjoy answering questions and helping your project run a little smoother! The item “Outdoor Wood Furnace Boiler swimming Pool & spa electronics hook up kit hot tub” is in sale since Thursday, June 9, 2016. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\Furnaces & Central Heating Systems”. The seller is “freeheat4u” and is located in Plymouth, Wisconsin. This item can be shipped worldwide.

  • Model: pool spa kit
  • Pool Type: Chlorinated
  • Brand: American Royal
  • MPN: Does Not Apply
18x20 Water to Air Heat Exchanger Hot Water Coil Outdoor Wood Furnace


18x20 Water to Air Heat Exchanger Hot Water Coil Outdoor Wood Furnace



18×20 Water to Air Heat Exchanger Hot Water Coil Outdoor Wood Furnace. This unit is a Water to Air Heat Exchanger for use in your hot air plenum of your existing forced air furnace. This unit is most commonly used in conjuction with an outside wood furnace to transfer heat into your existing forced air system. It can also be used with any other source of hot water such as a boiler to create hot air. This exchanger is for use with ANY outdoor wood stove. And also features quality aluminum fins with seamless copper tubes. The coils fit snuggly in the boxes to minimize movement within the box. There are strips of styrofoam all the way around the manifold to prevent damage if dropped. The entire coil is packaged in a double wall, cardboard box. 15 GPM and 2000 CFM (air flow). Make sure all of your auctions have ended prior to checking out. (Excludes Insulated Piping Systems, please see below). If an item arrives damaged or defective, return it within 7 days of arrival and we will replace it at our expense. The item “18×20 Water to Air Heat Exchanger Hot Water Coil Outdoor Wood Furnace” is in sale since Tuesday, May 17, 2016. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\Furnaces & Central Heating Systems”. The seller is “alternativeheat” and is located in Middleport, New York. This item can be shipped worldwide.

  • Brand: Outdoor Furnace Supply
  • Type: Simple
  • MPN: HWC-18X20
WaterLess Wood Outdoor Burner Furnace Forced Air -No Rust! No chemicals! 4375 sf


WaterLess Wood Outdoor Burner Furnace Forced Air -No Rust! No chemicals! 4375 sf


WaterLess Wood Outdoor Burner Furnace Forced Air -No Rust! No chemicals! 4375 sf


WaterLess Wood Outdoor Burner Furnace Forced Air -No Rust! No chemicals! 4375 sf


WaterLess Wood Outdoor Burner Furnace Forced Air -No Rust! No chemicals! 4375 sf


WaterLess Wood Outdoor Burner Furnace Forced Air -No Rust! No chemicals! 4375 sf


WaterLess Wood Outdoor Burner Furnace Forced Air -No Rust! No chemicals! 4375 sf


WaterLess Wood Outdoor Burner Furnace Forced Air -No Rust! No chemicals! 4375 sf


WaterLess Wood Outdoor Burner Furnace Forced Air -No Rust! No chemicals! 4375 sf


WaterLess Wood Outdoor Burner Furnace Forced Air -No Rust! No chemicals! 4375 sf


WaterLess Wood Outdoor Burner Furnace Forced Air -No Rust! No chemicals! 4375 sf


WaterLess Wood Outdoor Burner Furnace Forced Air -No Rust! No chemicals! 4375 sf


NOW with an ASH TRAY. NEW DESIGN with a BIGGER DOOR at 2 feet by 2 feet, a PULL-OUT ASH TRAY, A BIGGER SQUARE FIREBOX; WHICH MEANS MORE WOOD CAPACITY = LESS Loading and more heating capacity! Install one of these now! You don’t have bury Pex Pipe because there is NO Pex pipe; just simple duct-work! OR you can use simple and inexpensive galvanized duct-work above ground, put into a chase. NEW FEDERAL EPA LAWS. Are in effect now! Even for residential purposes, in MOST STATES. Outdoor wood BOILERS are now OUTLAWED in ALL 50 STATES! BUT that means that folks who have RESIDENCE or a shop (body, wood, auto, etc) or commercial business, greenhouse, barn, pool to heat etc. Because the law only prohibits wood ” BOILERS ” in most states! And people simply hate that the EPA models are HARD TO START and that it’s a full-time job to keep them running because with them, the wood has to be dried, under cover, for a minimum of two years! FYI: The new EPA models have a refractory (much like a jet engine) that must use special fuel remember unleaded gas? Wood MUST have LESS than 20% moisture content; must be dried under cover for a minimum of TWO YEARS Who does that? NOT SO with these WATER-LESS FURNACES! Just like the cars of the 60’s that had lots of power and got great gas mileage, used regular, less expensive gas, had gobs of power and could smoke the tires; then the EPA got involved and cars suddenly had 1/2 the horsepower and only got about about half the gas mileage and became dogs because of catalytic converters! HyProTherm FORCED AIR OUTDOOR WOOD FURNACE. This Model: ThermoWind 1000 is Rated to Heat up to 4375 sq. (No water to freeze; NO rust, NO chemicals needed). Shown using optional insulated underground ductwork. The LEAST EXPENSIVE EPA ALTERNATIVE! HyProTherm has done it again! Backed by our 46 years of experience, we have developed a FORCED-AIR Furnace that doesn’t need water! This furnace can go outside and does not have to be bolted to the house or go in the basement like every other model out there! Heat is carried to your home through insulated 12 pipes, which CAN be buried underground. No more worries about frozen water. NO CHEMICALS or annual water tests! Perfect for folks who have power failures often or those people with cabins or homes that are left unattended. NOW there is no need to put the furnace right next to the house or in the basement! Eliminate the threat of fire by having the furnace away from the house just like with our outdoor wood fired WATER furnace. No carrying wood into the house, along with the bugs, bark and trash. No smoke indoors either! These air pipes are only 12″ in diameter so a standard backhoe with a 24″ bucket can easily dig a trench for the pipes to lay side-by-side. Air and Water-Tight 12 Underground Ducts. HyProTherm has been building furnaces 46 years; since 1972! Our furnaces have stood the test of time and these WILL last even longer with no rust to deal with! They are built using the same materials, familiar design and proven techniques that we have been using for 46 years. Perfect for folks who have power failures often or those people with cabins or homes that are unattended. No worries about water freezing ever again! Two buried 12 pipes carry the heat to the house and the cooler return air comes back. OR you can use less expensive insulated galvanized pipe – above ground! The FIRST and SIMPLEST in the industry! We custom build every furnace for you , so when you order, you can specify YOUR choice of 21 great c o l o r s and over 8000 Color combinations! Our furnace is SO strong, we can suspend it from the chimney alone! This is how we move and load every one of them! Had a little fun with Photoshop here but this is really being lifted and moved by the chimney, made of 1/4 thick steel; that’s as thick as or thicker than most fireboxes! That’s the way we always move and unload them when we deliver them, every day :o . The best stove made. Best Outdoor Wood Burning Furnace Stove -Outside Boiler 40 yrs (No) Dent SALE (#190828779573). Best Outdoor Wood Burning Furnace Stove -Outside Boiler 40 yrs (No) Dent SALE (#190827370429). Thank you for the furnace. Best Outdoor Wood Furnace Stove – Outside Boiler 37 yrs (#190331731343). Item as described , very helpful , A+++. Reply by aware (Mar-09-08 18:06). We’re glad you like the Best Outdoor Wood Burning Furnace! Reply by aware (Mar-15-08 19:13). We’re glad you like our Outdoor Wood Burning Furnace! Reply by aware (Nov-03-07 10:12). Nice looking furnace worth to have delivered set on pad by nice helpful workers. Reply by aware (Oct-29-07 17:00). Reply by aware (Oct-25-07 14:39). I talked to the boss, and twisted his arm, and.. Now with even MORE INSULATION! R50 in the roof! R21.6 in the walls! More than a house! We now use SOLARGUARD TOO! It’s a state-of-the-art insulation that fights heat loss three ways; radiation, conduction and convection heat losses. Fed up with High Oil and Energy prices? Smoke in your house? Bugs, trash, bark from carrying wood in? Heat your whole house with a clean, efficient Forced-Air OUTDOOR WOOD FURNACE! No smoke in your house anymore! These furnaces don’t burn up the oxygen in your house or suck cold air in from outside! Save your lungs and help prevent allergies too. WOOD is still cheap! And large un-split logs – like this furnace uses – are the least expensive of all! Have Clean Heat, Clean Air, Clean Floors and walls too! (generously pro-rated years 6-20). Who else offers that? Who else has been around 46 years? A lot of warranties only cover parts (not labor)! Ours covers Parts AND Labor for TWENTY YEARS! Building Quality Wood Furnaces for 46 Years. We are actively looking for dealers in ALL STATES and Canada! We now have a dealer in the UK and France, a dealer/home builder in the Ukraine and one in Spain! MORE of OUR FURNACE BUYERS SAID. Best Outdoor Wood Outside Boiler – Furnace Stove 37 yrs (#190341274667). Can’t wait to get those low gas bills this winter! Best Outdoor Wood Outside Boiler – Furnace Stove 37 yrs (#120482376608). They answer any questions you have. Outdoor Wood Furnace Stove – Outside Boiler -Since 1972 (#190332576451). Good to deal with nice people. Very Good Deals On Very Good Products. We’re glad you like your Outdoor Wood Burning Furnace! Great to work with. Wounderfull working with him. Reply by aware: We’re glad you like our Outdoor Wood Burning Furnace! As nice, courteous, and helpful a sellers as you will EVER find! Would recommend excellent service thanks guys. Wood Boiler seems like a great unit. Yet to hook it up. We make it simple without a lot of expensive electronics to break. We make it user serviceable. Anyone can maintain our furnace! No filling with water every week – or EVER! We give accurate BTU ratings using an established scientific formula. They say what sounds good. We have a 2-light motion detector light on the front (not installed). We have a forced-air fan; not a dismal damper to fuel the fire with oxygen. Our fan is in the back , at the bottom, behind a door, where you can’t get shocked AND it blows the air through the grate into the bottom of the fire LIKE A BLACKSMITH’S FORGE – NOT into the side of the fire! Fires burn from the bottom up, right? We have been building fine energy efficient furnaces for 44 years! Our grates use THICK 3/4 Bar Stock! This Model: HyProTherm ThermoWind 1000 is Rated to Heat up to 4375 sq. Write to me and I will list one for you! As a test of burn times, the owner of HyProTherm Furnace took the thermostat off his 25 year-old water furnace, so that the fire would rage at maximum burn 24 hours a day. Yet he still only has to load it every 12 hours, at maximum burn – never shutting off! Normally, he goes as long as 24 hours without reloading it. Amother customer called and told me he goes 18 hours between loads (1/17/08). Don’t believe the hype and misinformation about 43-98 hour burn times. This is only true in the summer. Forced-Air furnaces tend to get even longer burn times. Our most popular color – Evergreen with Black trim. NO risk of water freezing! No chimney fire risk either! No logs to carry in means no messy ashes and bugs in the house! The chance of carbon monoxide build-up in your home is eliminated. Eliminate allergies by getting the smoke outside! The chance of a gas explosion from your furnace in your home is eliminated. Indoor pollutants of harmful gases and fumes are eliminated too. Eliminates the chance of chimney and flu fires from your furnace. If you live in a suburban or rural area near a source of cheap wood, you could heat your home for the entire season for the cost of one month’s electric heat bill. An outdoor furnace requires less tending. No inside oxygen is used to fuel the heat like other wood or gas burning units. Does not cause respiratory problems like burning wood indoors. Instead of 12-18′ wood split, you can put 30 pieces in this one and full rounds. Burning wood, a total renewable resource, is less expensive than other fuels. The cost of electric, gas, oil, or propane can be very erratic. The low cost of wood remains constant – or FREE! The furnace hooks up to any existing gas pack, heat pump or forced air system; even buildings with no ductwork or existing heating system. Most people pay for their furnace in 2 years or less! Where else can you get that? An outdoor wood burning furnace is the BEST INVESTMENT! Can take up to 3 min on a modem to load the whole page. A water furnace is shown here for color. Get the Bugs, Dirt, Wood and Smoke outside. Your lungs will love you! Many people are getting lower rates because they are getting the fire and related hazard, out of the house! Extra large, waist high loading door; NOW LARGER at 2 feet by 2 feet! No more bending over, straining your back to load wood! Lever action safety latch! A PROVEN design – since 1972! We feel we build the safest furnace (nothing electrical outside). We have the BEST PRICES and a Very Friendly Staff to help you every step of the way. These furnaces now come with a double flood light on the front, for ease and safety of loading the wood at night. Not only that, it’s a MOTION LIGHT! No forgetting to turn it off. If it’s dark outside and you go near the furnace, it turns on! New, nicer looking furnace – NO SILICONE Now with nice neat looking butyl tape and grommets. The door is 6″ WIDER and 6″ TALLER now! A 15″ round log, 30″ long, will weigh 112 lb – more than most people can ever lift! Trust me, the door is more than big enough for anything you can lift into the furnace AND the thick door frame will take a pounding as you throw them in! NOW 24″ x 24″ – The TOUGHEST door you’ll ever find with TWO 1/4″ solid steel plates separated by a 3″ air shield. This plate keeps the hot air in and deflects it off the door. With very little metal to transfer heat to the door it does an excellent job of insulating the door. There is also fiberglass insulation BETWEEN the plates now! Very heavy duty hinges! OURS won’t fall off! The chimney is low on the firebox and exits about 1 foot from the bottom, so that the smoke – or more importantly, the gas and heat – is trapped so that it doesn’t quickly escape out the flue. That would be a big loss of efficiency. This way the air has to cool off to find its way down and out the chimney. This is also a better idea since you don’t have hard-to-clean baffles getting a creosote buildup on them. Having the chimney come down low and stops the heat, gases and smoke from rushing right out the chimney AND creates a HUGE Secondary burn chamber to burn off all the gases from the wood – a HUGE source of energy! When wood starts to burn it’s the gas that burns first! Another advantage is that the chimney exits through the air chamber, further heating it up – for free! These are some of the reasons that our water furnace is one of the most efficient on the market. This also means that you will burn less wood than with others and therefore you will use more wood with the other – being less than 75% efficient. That’s proof, not just rhetoric. 125 and another at. Our standard THERMOWIND firebox is 1/4″ (Our boilers are over 4/10″ thick). We have never had a firebox failure, crack, split, rust-through or leak in 46 years of building furnaces. We have an ash pan! Some other makes don’t even have an ash pan!! That makes it HARD to clean out! You have to let the fire die down or move the burning wood aside to scoop out hot ashes. Only one factory seam in tube so it doesn’t weaken the structure, break or warp. It is made of a solid piece of tubular steel (drill casing)! It WILL NOT RUST through in a lifetime! Will not get stress cracks like Stainless Steel! We have furnaces 30 years old and more, still in use today! The removable grate is made out of THICK 3/4 inch bar stock. Now THAT is thick! We have NEVER had one burn through! (Most others are a thin 3/8 – 1/2). (Write to me and I will list a furnace with those grates in it). View through ash pan door and you can see the air blower inlet (seen in back of this picture). The blower in the back is a great aid in getting a fire started. It also recovers the air temperature much quicker, and burns the wood up more completely because oxygen is being fed to the bottom of the flame – like blacksmith feeds his fire! A clean-burning fire is more efficient than a smoky air-restricted fire. The forced draft will burn hotter and therefore cleaner. Secondary gases burn at 1200 degrees and with our furnace, they are trapped in the firebox so that they are available to be burnt off without escaping out the chimney. The HyProTherm will exceed that temperature in the firebox. The thermostatically controlled, forced air induction blower determines how hot the fire burns and therefore how hot the air in the furnace gets. A thermostat on the back of the furnace tells the blower when to turn on and off (and has a solenoid activated door) , so it doesn’t run all the time and waste wood. This is a LOT more efficient than a manual damper will ever be! The air blows into the bottom of the fire, through the grate – like a blacksmith’s forge. That’s better than blowing in from the front – into the side of the fire, as all others do (if they even have a fan). You get more complete burning from a fire where the oxygen is fed through the bottom as opposed to blowing over the fire from the side, like others that have that big box on the door! Actual photo of a fire inside our firebox, only minutes after reloading with wood! The air chamber totally surrounds the firebox, top, bottom, sides, front and back. The chimney is also surrounded by air, extracting that heat. The ash receptacle (and hot coals) are surrounded with air too! Full-sized forced air fan for your home or building and a forced air fan for furnace induction, with solenoid activated damper to shut off air supply when the fan turns off; saving you wood! A bigger 2000+ CFM blower installed standard – on left above. The fan will not turn on until the air temperature is 125F or higher, so that you don’t have cold air blowing into the house. You get a solenoid activated damper too! All parts are available everywhere. NOW there is no need to put the furnace right next to the house or have unsightly ductwork going across the yard! The two connectors in the back hook up to the INSULATED blue pipes which are buried in the ground, either with standard 12 inch galvanized duct work , that you would insulate yourself or you can use the black pipe shown at the top of this ad. This is the same as the blue duct work and is specially designed and made for our furnaces. These pipes are only 12″ in diameter so a standard backhoe with a 24″ bucket can easily dig a trench for the pipes to lay side-by-side. GREEN BUILDING Approved Adhesives. Ideal for new construction under a slab or basement, as you can see here but you would just need two pipes running to the house in an existing structure to connect to your duct work. This ash PAN is a removable ash pan. Some other makers don’t even have an ash pan! You have to let the fire die out or shove the hot burning logs aside – then clean it out while the firebox is 800 to 2000F degrees – and then restart the fire in the dead of winter! Who wants to do that? Air surrounds the front and back of the firebox and the ash pan as well. Heat from the red hot coals. There is an air handler/blower that feeds air into the firebox, below the grate, to feed oxygen to the fire. It is thermostatically controlled and solenoid activated for greater efficiency, to keep the air temperature in the furnace between certain parameters. This is far better than an inefficient manual or natural draft opening. Our furnace is so strong and well-made, that the chimney alone is strong enough to carry even the 3680 lb. Weight of our biggest water furnace! We move them like this every day! Exterior is made of Heavy Duty Siding – 29 gauge structural quality, full-hard steel. 10 layers of protective coating. 21 c o l o r s to best suit your surroundings! Mix and match the roof, roof trim, sides and corners and even the front can be a different / darker color so it doesn’t show the smoke stains as much! There are legs on the bottom , that you can’t see, with the siding surrounding the bottom to ground level. Concrete pad is recommended but not necessary. Use railroad ties, solid concrete blocks or? The chimney is made out of 1/4 thick, solid steel pipe and is surrounded by air. It tops out at about 90 feet above ground. You can EASILY add standard 6 stove pipe extension(s) with our FREE adapter (ask for it when ordering). Some other manufacturers have to have the whole hull removed by 2-3 people! Extra Large rear access hinged door. All electrical items are in back, safely behind the door/lid! Easy pipe (air) and electrical hookups (simple 110V wiring). No special tools needed. The easiest furnace for the self-installer to put in! Over 90% of our customers install our furnaces themselves! We help you every step of the way! Many people can pay for their furnace in a year and a half of oil or propane bills! Start with a small piece of wood. Seriously, you can use these bigger, cheaper pieces or smaller ones – whatever you can easily handle. ANY wood is cheaper than oil, gas and electricity! One person said that they have never used their propane heater after propane prices tripled! Whole rounds burn longer and cleaner and it’s SO NICE not having to split the wood! Shove the logs in on top of each other. Use the big, thick poker (provided) for safety to push them in. That big poker comes with the furnace – for FREE! Thought there wasn’t a fire? It can look as dark as night in the firebox but within a couple of minutes – literally – this fire was roaring! We use state-of-the-art Solar Guard insulation all around! Solar Guard is only 1/4 thick but combines a thermal break, reflective insulation and an insulating layer of R11.6! It has backing on both sides and is aluminum foil backed on one side. We then insulate on top of that with R11 vinyl-backed fiberglass in the walls and ceiling! TRIPLE INSULATED (R50) ON TOP – like a passive Solar house. You cannot feel the heat when you touch the siding! That gives you R22.6 in the walls and now R50 in the ceiling! FREE in Northern U. NOW FREE with THIS AD! Fed up with sky high High Oil and Energy prices? Heat your whole house and garage/workshop and your hot water and your driveway or walkway, and a Pool or Hot Tub with a clean, efficient OUTDOOR COAL FURNACE! NO bugs, no bark, no saw dust! They don’t burn up the oxygen in your house or suck cold air in from outside! Have Clean Heat, Clean Air, Clean Floors and walls and plentiful domestic Hot Water too, with our built-in heat exchanger in our Hot Water (Boiler) Coal Furnaces! Great with RADIANT HEAT! It’s the BEST! It’s the The Cleanest! And there’s no cold air blowing around! ALL HyProTherm furnaces have a. On-Site and 100% paid for the first 5 years! Years 6-20 very generously pro-rated! A lot of warranties only cover parts (not even labor)! A gentleman called me and told me his 2-year old C_____l B____r was leaking! Please allow 4-5 weeks for you furnace to be built because every furnaces is custom built for you and fitted with YOUR choice of 21 available colors. We will build YOUR furnace in any of 21 exciting colors or any combination thereof! Just a few EXAMPLES of Color Combinations. This green is supposed to look like the picture 2 above. Light grey with black trim. LOTS of Different colors and ALL come with motion lights! Water furnaces shown here to show assortment of colors. Ocean Blue with White; White and Red; Ivory with Brown; Green with Black; White with Black; Ivory with Green. Not all colors are available at all times. We can also build your furnace so that you can apply regular siding, brick, faux (cultured) stone or almost anything else. Write to me and I’ll list one for you. Questions about stainless steel answered. Do you build with stainless steel? No, we don’t build stainless for several really good reasons. Our furnaces last longer than stainless with MANY of our water furnaces still in use after 30 years plus!! Mild steel transfers heat better than stainless does. Stainless is a great sales feature, but little else, since most companies use cheap stainless, like a car’s exhaust system. There are many grades of stainless out there. Since stainless is so expensive, the fireboxes are made really thin. Some are no thicker than the metal in a 55 gallon barrel or the thickness of a trailer fender!! That’s why you see so many split and broken apart. Our optional firebox is almost. 500 inches thick (HALF INCH) as opposed to. 200 in many furnaces. Just 31 thousandths shy of 1/2 inch!! They never rust through. Stainless is more prone to stress cracks, so why use it? Unless the stainless is retreated after welding, you’ve lost all of it’s properties through the heating of the metal. And it’s being welded to mild steel anyway, so what’s the use? Like I said, it’s a great sales feature but our super thick mild steel furnace heats better, doesn’t crack and split – and last longer! If stainless was better, we’d surely be using it after 46 years of experience. The potential for electrical shock is something we have tried to totally eliminate. That is why unlike our competitor’s stoves, our stoves do not have electrical control boxes, draft fans, etc. We believe these impose too much risk should a problem ever arise. We also believe that to have anything too complicated on a wood furnace is unnecessary. We have made our furnaces to be simple, and reliable and we have proven that with 43 years of use. We do not have complicated self-fill, bladders or water level indicators on our furnaces. You don’t need them with Forced-Air! These stoves were developed by us, for our own use. We started making them for others slowly and now our stoves are well known locally for their simplicity, and their maintenance-free operation. Forced-Air Wood Furnaces are indeed an excellent, almost zero-maintencance heating choice. HyProTherm Furnace is a privately held company and was established in 1972. Heating and Air business preceded it and dates back to. Billy and his dad, Gerald were in the heating and air business for decades. They began to develop their first prototype. For their own home. In the 60’s. Gerald knew there had to be a better way than to pay for oil, even though it was cheap back then. His main concern however, was to get rid of the smoke and ashes in the house. It was obvious it could cause serious health problems. Besides the soot all over the place was a chore to clean. Having the wood outside already, made the plan simple. Put the wood stove outside! He developed a model for himself and continued to improve on it over the years. Our furnace was indeed the first. The last revision was made in 2009 and the furnace remains unchanged, except for cosmetics, today. Now Gerald’s son Billy heads up the business. We have been in business for 46 years and we are a family run business. We are a brick and mortar business in Salem Arkansas and we are here to stay. We stand behind the quality of our furnaces 100%. We believe that we can give you a quality furnace and save you hundreds if not thousands of dollars at the same time. See My Great 100% Perfect Feedback! How is Feedback Percentage calculated? Member since: Apr-05-98 in United States. More Feedback received on the HyProTherm Outdoor Wood Furnace, over the past TEN years! Reply by aware: We’re glad you like our Outdoor Wood Furnace Boiler! Great ebayer five stars!!! Great people to deal with. Reply by aware: We’re glad you like your Outdoor Wood Burning Furnace! Reply by aware: We’re glad you like your Outdoor Wood Burning Furnace. Reply by aware: We’re glad you like your Outdoor Wood Burning Furnac e. First 5 years On-Site! One-year on fan and thermostat. Pay me securely with your. From Salem, AR 72576. Bank Checks and C. Thanks for looking and have a great day! 2006, 2007, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018. The item “WaterLess Wood Outdoor Burner Furnace Forced Air -No Rust! No chemicals! 4375 sf” is in sale since Wednesday, July 12, 2017. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\HVAC Parts & Accessories”. The seller is “aware” and is located in Salem, Arkansas. This item can be shipped to United States.

  • Modified Item: No
  • Country/Region of Manufacture: United States
  • Custom Bundle: No
  • Model: TW1000
  • Type: Water-less
  • Color: Multicolor
  • MPN: TW1000
  • Finish: Metal
  • Brand: Hyprotherm
  • Non-Domestic Product: No
Outdoor Wood Boiler, Furnace, Stove


Outdoor Wood Boiler, Furnace, Stove


Outdoor Wood Boiler, Furnace, Stove


Outdoor Wood Boiler, Furnace, Stove


Outdoor Wood Boiler, Furnace, Stove


Outdoor Wood Boiler, Furnace, Stove


Outdoor Wood Boiler, Furnace, Stove


This furnace and water jacket are manufactured using 1/4+ thick plate steel. The water tank is approx. Heats up to 3,500 sq. Comes complete with one pump, valves, and flanges. Also comes with dual pump capacity to heat multiple buildings. The firebox has a steel baffle system which causes a more efficient, cleaner burn. Effectively burns seasoned or green wood. Comes with a full wrapped insulated water jacket of R19. The system is pre-wired with the circulating pump and draft inducer motor and Aqua stat to control the draft inducer. This unit has an easy read temp. Gauge on the outside of cabinet. The draft control has a damper that opens and closes when the blower starts and stops to prevent an out of control burn when the blower stops. Forced Draft Fan for Hot Burn and Less Smoke. The door is 3″ thick and has a generous 17″X17″ opening with a 30″x 38deep firebox. The smoke stack is also made of schedule 40 structural steel. The cabinet is a powder coat painted 29ga. Available in a variety of colors. The unit is approximate 44″ wide by 64″ high and 74 long (not including additional flu height). Approximate weight is 1400 pounds. This is an open system. Heats your Business, Greenhouse, and many other uses. Buyers responsibility to comply with local and state laws for their area. Does not carry UL listing. We are happy to answer any questions you may have! The item “Outdoor Wood Boiler, Furnace, Stove” is in sale since Monday, October 1, 2018. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\Furnaces & Central Heating Systems”. The seller is “happyathome0_0″ and is located in Shelby, Michigan. This item can’t be shipped, the buyer must pick up the item.

  • Brand: Millennium Craft
  • Country/Region of Manufacture: United States
  • Location: Outdoors
  • Power Source: Wood