Just another WordPress weblog

50k NEW STYLE Hydronic hanging heater, Variable speed fan NO WIRING NEEDED


50k NEW STYLE Hydronic hanging heater, Variable speed fan NO WIRING NEEDED


50,000 BTUs / 100 PSI. Hanging unit heater for garages, warehouses, greenhouses, ect. Hangs from ceiling and uses hot water to heat your dwelling. New style makes your installation look much cleaner as both inlet and return pipes come out next to each other on the top of the unit. This also makes the units much more efficent because no air becomes trapped in the unit. Other Sizes available, Units plug directly into a wall outlet! DOES NOT INCLUDE THERMOSTAT WITH THIS UNIT. These heat exchangers are to be hooked up to a boiler or a chilled water source. If using as a chilled water source, a drip pan will need to be provided by owner. Width = 15 ¾. Depth = 13 ½ including fan. Weight = 24 lbs. These are special in the fact they can be mounted either the typical way with threaded rods though the unit or mounted to bolt holes on the sides of the units. These units can be mounted in any direction and are complete with adjustable front louvers. All units have 1 inch copper inlet and outlets for high flow. The item “50k NEW STYLE Hydronic hanging heater, Variable speed fan NO WIRING NEEDED” is in sale since Thursday, June 20, 2019. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\Furnaces & Central Heating Systems”. The seller is “badger-pipe” and is located in Mauston, Wisconsin. This item can be shipped to United States.

  • Brand: Undisclosed
  • MPN: Does not apply
  • UPC: 689807252920
Designer Bone Style Radiator Heated Towel Rail Black 300mm wide 1200mm high


Designer Bone Style Radiator Heated Towel Rail Black 300mm wide 1200mm high


Designer Bone Style Radiator Heated Towel Rail Black 300mm wide 1200mm high


Designer Bone Style Radiator Heated Towel Rail Black 300mm wide 1200mm high


Designer Bone Style Radiator Heated Towel Rail Black 300mm wide 1200mm high


Designer Bone Style Radiator Heated Towel Rail Black 300mm wide 1200mm high


Designer Bone Style Radiator Heated Towel Rail Black 300mm wide 1200mm high


300mm width 1200mm Height Designer Radiator Bone Style Heated Towel Rail Black. Patent Pending Ultra Slim Design. Fast and Free Dispatch. Brackets, Screws, and Plugs Are Included. Plenty Room For Towels. Free Chrome Towel Bars (x 2). Heat Output: 1685 Btu – 494 W. Wall To Pipe Centres: 35-55mm. Projection From The Wall: 68-88mm. Usage: Central Heating Only. We have Also Stock Electric Model, Please Check Our Store. Whats In The Box: Comes With 2 Wall Brackets and Chrome Towel Bars as well as air vent, screws and rawl plugs. Brand new in box. Designer Bone Style Radiator Heated Towel Rail Black 300mm wide 1200mm high. Towel Rail & Hooks. Towel Rails Parts & Spares. Our contact details as below in business contact details. We are proud with our fast dispatch. Return posting costs will be at your expense. We will pay for the return cost if there is problem with your order on our side. Can your heated towel rails be used on a standard central heating system? Yes our heated towel rails can be connected up like a normal radiator and all have high heat outputs – meaning they not only warm your towels, but your whole bathroom too. What is a BTU? BTU stands for’British Thermal Unit’ which is the measurement of the amount of energy needed to cool or heat one pound of water by one degree. One BTU is equivalent to about 0.3 Watts. How are your heat outputs calculated? Our heat outputs are all independently tested using EN442 regulations. Unlike other retailers we give the true heat output rather than a fictitious figure. We recommend asking any retailer for the heat output certificate for a particular product. Can this towel rail be converted to dual fuel? Yes our heated towel rails can be run on two energy sources, meaning that you can have run the towel rail from your central heating in the winter and your electricity supply in the summer. Warm towels all year round. (You can not convert Traditional/Victorian towel rails to dual fuel). What do I need to make my towel rail dual fuel? All you need is one of our dual fuel kits and you’re ready to go, take a look at our shop. Can the Heated Towel Rail be used as electric only? Heated towel rails can be used as electric only. The element is to be fitted, and then the towel rail filled with 85% water and 5% inhibitor, leaving a 10% gap at the top. If using as electric only (completely isolated), as long as the 25ml gap is left at the top there is no reason for it to overflow. The expansion and contracting is all done inside the radiator and can do so freely as long as there is a sufficient gap at the top of the towel rail. We do recommend that a qualified installer carries out the installation of your Electric Towel Rail. What are the Electric Towel Rails filled with? They are filled with a RO water Glycol solution which is an anti-corrosive liquid. Do I need straight or angled valves for my towel rail? The type of valve you will require depends on the installation of your towel rail. If your pipework is coming up from the ground, then generally straight radiator valves are used. Whereas if your pipework is coming from the wall at an angle, angled valves would be used. You can find our full range of valves available. Do your towel rails come with a guarantee? All of our towel rails come with a standard 10 Year’Fit and Forget’ Guarantee giving you the ultimate peace of mind. Who should install the towel rail or radiator? We recommend that any central heating towel rail or radiator is fitted by a qualified plumber/heating engineer, and any electrical items are installed by a qualified electrcian. 20-02-2018 16:29:38. The item “Designer Bone Style Radiator Heated Towel Rail Black 300mm wide 1200mm high” is in sale since Friday, April 19, 2013. This item is in the category “Home, Furniture & DIY\Bath\Towel Rails”. The seller is “companyblue” and is located in coventry, West Midlands. This item can be shipped worldwide.

  • Type: Heated Towel Rails
  • Main Colour: Black
  • Brand: Companyblue
  • Material: Steel
  • MPN: Does Not Apply
  • Country/Region of Manufacture: Turkey
  • Width: 310mm
  • Height: 1195mm
  • Pipe Centre: 50mm
  • Thickness: 7mm
  • Heat Output: 1685 Btu – 494 W
  • Model: Bone
NEW STYLE 50k Hydronic hanging heater, Variable speed fan NO WIRING NEEDED


NEW STYLE 50k Hydronic hanging heater, Variable speed fan NO WIRING NEEDED


50,000 BTUs / 100 PSI. Hanging unit heater for garages, warehouses, greenhouses, ect. Hangs from ceiling and uses hot water to heat your dwelling. New style makes your installation look much cleaner as both inlet and return pipes come out next to each other on the top of the unit. This also makes the units much more efficent because no air becomes trapped in the unit. Other Sizes available, Units plug directly into a wall outlet! DOES NOT INCLUDE THERMOSTAT WITH THIS UNIT. These heat exchangers are to be hooked up to a boiler or a chilled water source. Width = 15 ¾. Depth = 13 ½ including fan. Weight = 24 lbs. These are special in the fact they can be mounted either the typical way with threaded rods though the unit or mounted to bolt holes on the sides of the units. These units can be mounted in any direction and are complete with adjustable front louvers. All units have 1 inch copper inlet and outlets for high flow. The item “NEW STYLE 50k Hydronic hanging heater, Variable speed fan NO WIRING NEEDED” is in sale since Thursday, March 22, 2018. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\Furnaces & Central Heating Systems”. The seller is “badger-pipe” and is located in Mauston, Wisconsin. This item can be shipped worldwide.

  • Brand: Badger Insulated Pipe
  • MPN: Does Not Apply