Just another WordPress weblog

20x20 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange


20x20 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange


20×20 Water to Air Heat Exchanger1 Copper Ports w/ EZ Install Front Flange. 20×20 / 160,000 BTUs / 180 PSI. For use in your hot air furnace plenum. Not recommended for air compressors. Information about our heat exchangers. This heat exchanger is ideal for a 20″x 21″ plenum or larger. The outlets come out on the 20 side (shown as the vertical side in the picture above). The fin area is 20″x 20″. There is a 1 frame on the end opposite the outlets that covers the copper elbows. This makes the area inside of your plenum 1 longer. All exchangers are 3 1/2 thick. Outside Dimensions 20(width)x23.5(Length from Manifold to Base)x3.5(Thickness). Aluminum fins are installed at 12 fines per inch. All exchangers are triple pass design. Tubing is 1/4 copper. All our exchangers include the flat front face mounting for easier installation and increased plenum strength. Our exchangers have 1 copper outlets and can be installed with either sweat fittings or push fit type fittings like sharkbite’s. Exchangers will work with chilled water also. We stock many sizes, always order the largest size that will fit into your plenum. Installation brackets for installing water to air heat exchangers inside of furnace plenums. This easy to install kit takes all of the work out of installing a coil. Great for the do it yourselfer or the seasoned installer. Even most that are listed as 4″ are actually 3.5″. As a stand alone heat source by simply attaching a fan or squirrel cage to one side of the unit. They can be installed in either the hot air side or the cold air return of a furnace. Please note that if installed in the cold air return you will need to install a 3 way zone valve in order for the fan to operate properly. This heat exchanger is of a new style which does not require bending of your duct work. This new style heat exchanger can be easily installed by just slipping it into the plenum and attaching with self threading screws. You will not need any special tools to install. This unit is easier to install than others on the market because it attaches from the front instead of the side. Water to Air heat exchangers, often called duct coils or furnace radiators, are uséd for installing into forced air furnace to provide heat from hot water. They work in much the same way as the central air conditioning unit. The following things should be taken into consideration when installing a duct coil. (1) Size the coil so that the fins take up the maximum amount of the plenum as possible. (2) Securely fasten the unit so that it doesn’t rattle. (3) Make sure there are no foreign objects are touching the fins or the tubes. (4) Duct tape any air leaks. (5) Do not bend the fins. If you do, straighten them as best you can. A tool called a “Rake” is available for straightening the fins. (6) If you are going to run your outside heat in the summer install a bypass valve. (7) A duct coil installation kit makes installing the heat exchanger easier. 24×24 w/1 1/4 ports. 30×30 w/1 1/4 ports. 36×36 w/1 1/4 ports. The item “20×20 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange” is in sale since Thursday, June 20, 2019. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\Furnaces & Central Heating Systems”. The seller is “badger-pipe” and is located in Mauston, Wisconsin. This item can be shipped worldwide.

  • Brand: Undisclosed
  • MPN: Does not apply
  • UPC: 689807252500
20x20 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange


20x20 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange


20x20 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange


20x20 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange


20x20 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange


20×20 / 160,000 BTUs / 180 PSI. For use in your hot air furnace plenum. Not recommended for air compressors. Information about our heat exchangers. This heat exchanger is ideal for a 20″x 21″ plenum or larger. The outlets come out on the 20 side (shown as the vertical side in the picture above). The fin area is 20″x 20″. There is a 1 frame on the end opposite the outlets that covers the copper elbows. This makes the area inside of your plenum 1 longer. All exchangers are 3 1/2 thick. Outside Dimensions 20(width)x23.5(Length from Manifold to Base)x3.5(Thickness). Aluminum fins are installed at 12 fines per inch. All exchangers are triple pass design. Tubing is 1/4 copper. All our exchangers include the flat front face mounting for easier installation and increased plenum strength. Our exchangers have 1 copper outlets and can be installed with either sweat fittings or push fit type fittings like sharkbite’s. Exchangers will work with chilled water also. We stock many sizes, always order the largest size that will fit into your plenum. Installation brackets for installing water to air heat exchangers inside of furnace plenums. This easy to install kit takes all of the work out of installing a coil. Great for the do it yourselfer or the seasoned installer. Even most that are listed as 4″ are actually 3.5″. These heat exchangers are to be hooked up to a boiler or a chilled water source. When hooked up to your boiler or chilled water source, these heat exchangers can also be used as a stand alone heat source by simply attaching a fan or squirrel cage to one side of the unit. They can be installed in either the hot air side or the cold air return of a furnace. Please note that if installed in the cold air return you will need to install a 3 way zone valve in order for the fan to operate properly. This heat exchanger is of a new style which does not require bending of your duct work. This new style heat exchanger can be easily installed by just slipping it into the plenum and attaching with self threading screws. You will not need any special tools to install. This unit is easier to install than others on the market because it attaches from the front instead of the side. Water to Air heat exchangers, often called duct coils or furnace radiators, are used for installing into forced air furnace to provide heat from hot water. They work in much the same way as the central air conditioning unit. The following things should be taken into consideration when installing a duct coil. (1) Size the coil so that the fins take up the maximum amount of the plenum as possible. (2) Securely fasten the unit so that it doesn’t rattle. (3) Make sure there are no foreign objects are touching the fins or the tubes. (4) Duct tape any air leaks. (5) Do not bend the fins. If you do, straighten them as best you can. A tool called a “Rake” is available for straightening the fins. (6) If you are going to run your outside heat in the summer install a bypass valve. (7) A duct coil installation kit makes installing the heat exchanger easier. 24×24 w/1 1/4 ports. 30×30 w/1 1/4 ports. 36×36 w/1 1/4 ports. The item “20×20 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange” is in sale since Tuesday, June 12, 2018. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\Furnaces & Central Heating Systems”. The seller is “badger-pipe” and is located in Mauston, Wisconsin. This item can be shipped worldwide.

  • Brand: Badgerpipe
  • Model: 20×20
  • Type: Heat Exchanger
  • MPN: 20×20
Yellow Jacket 40944 Manifold with 1/4 Ports And 5/16Hose Fittings Bar/Mpa R-410A


Forged body is solid brass for durability. Full porting maximizes capacity. Metal valve handles are full size for easy operation. Hose anchors are forged into back of body at 45°. The item “Yellow Jacket 40944 Manifold with 1/4 Ports And 5/16Hose Fittings Bar/Mpa R-410A” is in sale since Wednesday, March 9, 2016. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\HVAC Parts & Accessories”. The seller is “hvacmegastore” and is located in Kansas City, Missouri. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

  • Height: 2.8
  • Brand: Yellow Jacket
  • MPN: 40944
  • Width: 8.5
OUTDOOR WOOD FURNACE BOILER BRAZED PLATE HEAT EXCHANGER 30 Plate 1 1/4 PORTS


30 Plate Heat Exchanger with 1 1/4 inch ports. IT ALSO MAKE THE PORTS SO CLOSE TOGETHER THAT IT IS VERY HARD TO PUT A FITTING ON THEM!!! H 1 ¼ Threaded Nipples MPT. When using on your existing indoor boiler you want 1 1/4 inch fittings as not to have to reduce your existing system. THIS IS VERY IMPORTANT. You can reduce the outdoor wood boiler side to 1 inch if needed though with a reducer coupler if needed!! Our superior brazed plate style water to water heat exchanger features 316 stainless steel and is UL listed. For use with outdoor wood boilers, hot water recirculation systems, snow melt, solar systems, WVO and many other applications. Our large style 30 plate is 12 long! Don’t be fooled by smaller units and don’t settle for less quality! Units, NOT the cheaper 304 Stainless Steel! Overall dimensions: 5″ wide, 12″ long with 1 1/4 threaded (MPT) nipples. Maximum temperature 437 degrees Fahrenheit. The feed and return is 1 1/4 MPT. TECHNICAL DATA: Type: Brazed Plate Heat Exchanger Plate Material: ASTM 316L Stainless Steel Dimensions: 12″ long x5″ wide (see the photo below for reference: a x b sizes respectively) Outlet sizes: 1 1/4 Male IPS (MPT) threaded nipples, ASTM standard Min. Operating temperature: -256 F Max. Operating temperature: 437 F Max. Design pressure: 435 psi. The most important thing is the length and width of the heat exchanger. Ours are 12 inches. This is important as it has the most heat transfer area. Sizing is not just about the amount of plates, but also the area for heat transfer! The port size is important! This will decrease water flow to the rest of your system. Ours are 1 inch! Make sure you properly size your heat exchanger. Here is a guide based on the larger 12 exchangers. Others may not be there to service you down the road. Below is a guide to help you. It is always better to have more than enough heat, than not enough! Again, all items above are based on a 12″ length and 1″ ports. 10 plates are used for domestic hot water or small in-floor heating. Applications of less than 1100 sq ft. These will work with the largest of. Domestic hot water systems and should never need to be larger unless you. Use your domestic hot water for more than 3 hours straight at one time. 20 Plates are used for smaller homes from 1100 – 2500 sq ft. 40 Plates are used for larger homes from 2500 – 4500 sq. 70 Plates are used for areas 5000 – 7000 sq ft. This is the best quality on the market for. Better efficiency and longer life. Item may not be an expired listing. Over 10 years experience! This unit comes with a lifetime waranty against manufacturers defects. UPS ground 2-3 days. Fully insured and properly boxed. To insure safe arrival at your home. We offer service even after the sale! 7 days a week! Tired of talking to dealers and sellers who don’t even know their own products? Unlike others, we service what we sell! Our feedback is earned! We just want to take the time to thank your for the opportunity to service you and your project! We enjoy answering questions and helping your project run a little smoother! The item “OUTDOOR WOOD FURNACE BOILER BRAZED PLATE HEAT EXCHANGER 30 Plate 1 1/4 PORTS” is in sale since Wednesday, April 22, 2015. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\Furnaces & Central Heating Systems”. The seller is “freeheat4u” and is located in Campbellsport, Wisconsin. This item can be shipped to North, South, or Latin America, all countries in Europe, Australia.

  • Outlet Size: 1 1/4″
  • Material: 316 Stainless Steel
  • Power Source: Wood
  • MPN: Does Not Apply
  • Brand: American Royal
  • Model: 30 PLATE LARGE
16x18 Water to Air Heat Exchanger 1 Copper Ports with EZ Install Front Flange


16x18 Water to Air Heat Exchanger 1 Copper Ports with EZ Install Front Flange


16x18 Water to Air Heat Exchanger 1 Copper Ports with EZ Install Front Flange


16x18 Water to Air Heat Exchanger 1 Copper Ports with EZ Install Front Flange


16x18 Water to Air Heat Exchanger 1 Copper Ports with EZ Install Front Flange


16×18 / 115,200 BTUs / 100 PSI For use in your hot air furnace plenum. Please see charts in above pics. Not recommended for air compressors. This listing does not include the install kit. Information about our heat exchangers. This heat exchanger is ideal for a 16″x 19″ plenum or larger. The outlets come out on the 16 side (shown as the vertical side in the picture above). The fin area is 16″x 18″. Outside Dimensions 16(width)x21.5(Length from Manifold to Base)x3.5(Thickness). There is a 1 frame on the end opposite the outlets that covers the copper elbows. This makes the area inside of your plenum 1 longer. All exchangers are 3 1/2 thick. Aluminum fins are installed at 12 fines per inch. All exchangers are triple pass design. Tubing is 1/4 copper. All our exchangers include the flat front face mounting for easier installation and increased plenum strength. Our exchangers have 1 copper outlets and can be installed with either sweat fittings or push fit type fittings like sharkbite’s. Exchangers will work with chilled water also. We stock many sizes, always order the largest size that will fit into your plenum. Installation brackets for installing water to air heat exchangers inside of furnace plenums. This easy to install kit takes all of the work out of installing a coil. Great for the do it yourselfer or the seasoned installer. Even most that are listed as 4″ are actually 3.5″. These heat exchangers can also be used as a stand alone heat source by simply attaching a fan or squirrel cage to one side of the unit. They can be installed in either the hot air side or the cold air return of a furnace. Please note that if installed in the cold air return you will need to install a 3 way zone valve in order for the fan to operate properly. This heat exchanger is of a new style which does not require bending of your duct work. This new style heat exchanger can be easily installed by just slipping it into the plenum and attaching with self threading screws. You will not need any special tools to install. This unit is easier to install than others on the market because it attaches from the front instead of the side. Check our other listings for an installation kit that makes it super easy to do the entire installation. Water to Air heat exchangers, often called duct coils or furnace radiators, are used for installing into forced air furnace to provide heat from hot water. They can be installed into the cold air side of the furnace if that is the best option. They work in much the same way as the central air conditioning unit. The following things should be taken into consideration when installing a duct coil. (1) Size the coil so that the fins take up the maximum amount of the plenum as possible. (2) Securely fasten the unit so that it doesn’t rattle. (3) Make sure there are no foreign objects are touching the fins or the tubes. (4) Duct tape any air leaks. (5) Do not bend the fins. If you do, straighten them as best you can. A tool called a “Rake” is available for straightening the fins. (6) If you are going to run your outside heat in the summer install a bypass valve. (7) A duct coil installation kit makes installing the heat exchanger easier. The item “16×18 Water to Air Heat Exchanger 1 Copper Ports with EZ Install Front Flange” is in sale since Wednesday, February 4, 2015. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\Furnaces & Central Heating Systems”. The seller is “badger-pipe” and is located in Mauston, Wisconsin. This item can be shipped worldwide.

  • Type: Heat Exchanger
  • MPN: 16×18
  • Brand: Badgerpipe
  • Model: 16×18
18x18 Water to Air Heat Exchanger 1 Copper Ports with EZ Install Front Flange


18x18 Water to Air Heat Exchanger 1 Copper Ports with EZ Install Front Flange


18x18 Water to Air Heat Exchanger 1 Copper Ports with EZ Install Front Flange


18x18 Water to Air Heat Exchanger 1 Copper Ports with EZ Install Front Flange


18x18 Water to Air Heat Exchanger 1 Copper Ports with EZ Install Front Flange


18×18 / 129,600 BTUs / 100 PSI For use in your hot air furnace plenum. Please see charts in the pics above. Not recommended for air compressors. This listing does not include the install kit. Information about our heat exchangers. This heat exchanger is ideal for a 18″x 19″ plenum or larger. The outlets come out on the 18 side (shown as the vertical side in the picture above). The fin area is 18″x 18″. Outside Dimensions 18(width)x21.5(Length from Manifold to Base)x3.5(Thickness). There is a 1 frame on the end opposite the outlets that covers the copper elbows. This makes the area inside of your plenum 1 longer. All exchangers are 3 1/2 thick. Aluminum fins are installed at 12 fines per inch. All exchangers are triple pass design. Tubing is 1/4 copper. All our exchangers include the flat front face mounting for easier installation and increased plenum strength. Our exchangers have 1 copper outlets and can be installed with either sweat fittings or push fit type fittings like sharkbite’s. Exchangers will work with chilled water also. We stock many sizes, always order the largest size that will fit into your plenum. Installation brackets for installing water to air heat exchangers inside of furnace plenums. This easy to install kit takes all of the work out of installing a coil. Great for the do it yourselfer or the seasoned installer. Even most that are listed as 4″ are actually 3.5″. These heat exchangers can also be used as a stand alone heat source by simply attaching a fan or squirrel cage to one side of the unit. They can be installed in either the hot air side or the cold air return of a furnace. Please note that if installed in the cold air return you will need to install a 3 way zone valve in order for the fan to operate properly. This heat exchanger is of a new style which does not require bending of your duct work. This new style heat exchanger can be easily installed by just slipping it into the plenum and attaching with self threading screws. You will not need any special tools to install. This unit is easier to install than others on the market because it attaches from the front instead of the side. Check our other listings for an installation kit that makes it super easy to do the entire installation. Water to Air heat exchangers, often called duct coils or furnace radiators, are used for installing into forced air furnace to provide heat from hot water. They can be installed into the cold air side of the furnace if that is the best option. They work in much the same way as the central air conditioning unit. The following things should be taken into consideration when installing a duct coil. (1) Size the coil so that the fins take up the maximum amount of the plenum as possible. (2) Securely fasten the unit so that it doesn’t rattle. (3) Make sure there are no foreign objects are touching the fins or the tubes. (4) Duct tape any air leaks. (5) Do not bend the fins. If you do, straighten them as best you can. A tool called a “Rake” is available for straightening the fins. (6) If you are going to run your outside heat in the summer install a bypass valve. (7) A duct coil installation kit makes installing the heat exchanger easier. The item “18×18 Water to Air Heat Exchanger 1 Copper Ports with EZ Install Front Flange” is in sale since Thursday, February 5, 2015. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\Furnaces & Central Heating Systems”. The seller is “badger-pipe” and is located in Mauston, Wisconsin. This item can be shipped worldwide.

  • Type: Heat Exchanger
  • MPN: 18×18
  • Brand: Badgerpipe
  • Model: 18×18
OUTDOOR WOOD FURNACE BOILER BRAZED PLATE HEAT EXCHANGER 40 Plate 1 1/4 PORTS


IT ALSO MAKE THE PORTS SO CLOSE TOGETHER THAT IT IS VERY HARD TO PUT A FITTING ON THEM!!! 40 Plate Heat Exchanger with 1 ¼ Threaded Nipples. When using on your existing indoor boiler you want 1 1/4 inch fittings as not to have to reduce your existing system. THIS IS VERY IMPORTANT. Others sell the less expensive 1 inch fittings. You can reduce the outdoor wood boiler side to 1 inch if needed though with a reducer coupler if needed!! Our superior brazed plate style water to water heat exchanger features 316 stainless steel and is UL listed. For use with outdoor wood boilers, hot water recirculation systems, snow melt, solar systems, and many other applications. Our large style 40 plate is 12 long! Don’t be fooled by smaller units and don’t settle for less quality! Units, NOT the cheaper 304 Stainless Steel! Overall dimensions: 5″ wide, 12″ long with 1 1/4 threaded (MPT) nipples. Maximum temperature 437 degrees Fahrenheit. The feed and return is 1 1/4 MPT. TECHNICAL DATA: Type: Brazed Plate Heat Exchanger Plate Material: ASTM 316L Stainless Steel Dimensions: 12″ long x5″ wide (see the photo below for reference: a x b sizes respectively) Outlet sizes: 1 1/4 Male IPS (MPT) threaded nipples, ASTM standard Min. Operating temperature: -256 F Max. Operating temperature: 437 F Max. Design pressure: 435 psi. The most important thing is the length and width of the heat exchanger. Ours are 12 inches. This is important as it has the most heat transfer area. Sizing is not just about the amount of plates, but also the area for heat transfer! The port size is important! This will decrease water flow to the rest of your system. Ours are 1 inch! Make sure you properly size your heat exchanger. Here is a guide based on the larger 12 exchangers. Others may not be there to service you down the road. Below is a guide to help you. It is always better to have more than enough heat, than not enough! Again, all items above are based on a 12″ length and 1″ ports. 10 plates are used for domestic hot water or small in-floor heating. Applications of less than 1100 sq ft. These will work with the largest of. Domestic hot water systems and should never need to be larger unless you. Use your domestic hot water for more than 3 hours straight at one time. 20 Plates are used for smaller homes from 1100 – 2500 sq ft. 40 Plates are used for larger homes from 2500 – 4500 sq. 70 Plates are used for areas 5000 – 7000 sq ft. This is the best quality on the market for. Better efficiency and longer life. Item may not be an expired listing. Over 10 years experience! This is all we do, so give us a call and let our knowledgeable staff help you get your project done right! This unit comes with a lifetime waranty against manufacturers defects. UPS ground 2-3 days. Fully insured and properly boxed. To insure safe arrival at your home. We offer service even after the sale! 7 days a week! Tired of talking to dealers and sellers who don’t even know their own products? Unlike others, we service what we sell! Our feedback is earned! We just want to take the time to thank your for the opportunity to service you and your project! We enjoy answering questions and helping your project run a little smoother! The item “OUTDOOR WOOD FURNACE BOILER BRAZED PLATE HEAT EXCHANGER 40 Plate 1 1/4 PORTS” is in sale since Tuesday, April 30, 2013. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\Furnaces & Central Heating Systems”. The seller is “freeheat4u” and is located in Campbellsport, Wisconsin. This item can be shipped to North, South, or Latin America, all countries in Europe, Australia.

  • Model: 40 PLATE
  • Material: 316 Stainless Steel
  • Power Source: Wood
  • MPN: Does Not Apply
  • Brand: American Royal
  • Outlet Size: 1 1/4″