Just another WordPress weblog

1300 CFM 2-Speed Portable Evaporative Swamp Cooler For 500 sq ft Outdoor Compact


1300 CFM 2-Speed Portable Evaporative Swamp Cooler For 500 sq ft Outdoor Compact


1300 CFM 2-Speed Portable Evaporative Swamp Cooler For 500 sq ft Outdoor Compact


1300 CFM 2-Speed Portable Evaporative Swamp Cooler For 500 sq ft Outdoor Compact


1300 CFM 2-Speed Portable Evaporative Swamp Cooler For 500 sq ft Outdoor Compact


1300 CFM 2-Speed Portable Evaporative Swamp Cooler For 500 sq ft Outdoor Compact


1300 CFM 2-Speed Portable Evaporative Swamp Cooler For 500 sq ft Outdoor Compact


1300 CFM 2-Speed Portable Evaporative Swamp Cooler For 500 sq ft Outdoor Compact


1300 CFM 2-Speed Portable Evaporative Swamp Cooler For 500 sq ft Outdoor Compact


1300 CFM 2-Speed Portable Evaporative Swamp Cooler For 500 sq ft Outdoor Compact


1300 CFM 2-Speed Portable Evaporative Swamp Cooler For 500 sq ft Outdoor Compact


1300 CFM 2-Speed Portable Evaporative Swamp Cooler For 500 sq ft Outdoor Compact



Hessaire 1,300 CFM 2-Speed Portable Evaporative Cooler (Swamp Cooler) For 500 Sq. The Hessaire 1,300 CFM Evaporative Cooler is compact in size, pleasing in aesthetics and the performance exceeds coolers of a much larger size. This performance is achieved through expanding air-intake areas to the hi-density XeL50 rigid media. The hi-density XeL50 media provides 80% more evaporation surface compared to regular density media. This means higher evaporation efficiency and cooler temperatures. Patented axial prop is energy efficient and throws cool air farther. Molded with ABS resin, creating a strong, yet lightweight design. High-density XeL50 media provides 80% more evaporation surface compared to normal density media. Pleasing aesthetics and compact size allow this model to outperform larger coolers. Patented axial propeller is energy efficient and throws cool air farther. Water tank holds 4.8 gal. For a 3-4 hour run time. 3-sided pad intake area allows for maximum cooling. Rugged poly propylene housing with UV protection. ABS resin makes for a strong, lightweight design. Your satisfaction is the most important thing for us. The item “1300 CFM 2-Speed Portable Evaporative Swamp Cooler For 500 sq ft Outdoor Compact” is in sale since Saturday, June 22, 2019. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\Portable Air Conditioners”. The seller is “madmonkeydeals” and is located in Multiple Locations. This item can be shipped to United States.

  • MPN: MC18M
  • Brand: Hessaire
Outdoor Wood Furnace Boiler Heater Stove Free Heat


Outdoor Wood Furnace Boiler Heater Stove Free Heat


Outdoor Wood Furnace Boiler Heater Stove Free Heat


Outdoor Wood Furnace Boiler Heater Stove Free Heat


Outdoor Wood Furnace Boiler Heater Stove Free Heat


This is for non-residential use only! This is our new 3′ WOW 36 HD NR Unit. It has a heavy duty firebox This furnace requires dry wood so you should own a 32″-36″ wood splitter for best performance. Firebox Dimensions Firebox Length 36″ Firebox Height 27″ Firebox Width 24″ OVERALL DIMENSIONS L 50″ H 60″ W 48″ FIRST EVER OUTDOOR WOOD FIRED HYDRONIC HEATER FIRST AND FINEST IN UPDRAFT GASIFICATION. THIS IS FROM THE GOVERNMENT’S QUESTIONS AND ANSWERS PAGE ON BURN WISE. The local air pollution agency says I cant sell my old wood stove to help pay for an EPA-certified wood stove. Replacing an older stove with a cleaner-burning stove will not improve air quality if the older stove is reused somewhere else. For this reason, wood stove programs usually require older stoves to be destroyed and recycled as scrap metal, or rendered inoperable. Start fires only with newspaper and dry kindling. Never start a fire with gasoline, kerosene, charcoal starter, or a propane torch. Do not burn wet or green (unseasoned) logs. Wood burns best when the moisture content is less than 20 percent. Does it matter what people burn in hydronic heaters? Use of the wrong fuels in a hydronic heater can decrease the efficiency of your heater, increase pollution, and sometimes can be dangerous. All firewood should be split, securely covered or stored, and aged for at least six months. Seasoned wood burns hotter, cuts fuel consumption and reduces the amount of smoke your appliance produces. Choose the right firewood. Hardwoods are the best. Never burn trash or treated wood which can emit toxic air pollutants. Use only clean newspaper or dry kindling to start a fire. Never use gasoline, kerosene, charcoal starter, or a propane torch. Choose the right-sized appliance for your needs. If your woodburning appliance is too big for your room or house, the fuel will smolder and create more air pollution. GO GREEN WITH THE LIL’ POWERHOUSE. You are purchasing a new Lil’ Powerhouse Model 36 WOW HD NR Outdoor Wood Fired Hydronic Heater FEATURES. This furnace is designed to burn. Dry, split, cured wood. You will burn 1/2 – 2/3 less wood than an outdoor wood boiler burning green wood. Weight is 900#’s. Can produce up to 500,000 BTU’s per hour on a continual basis. This furnace burning dry split cured oak and using 50,000 BTU’s per hour will need to be loaded every 38.9. This furnace burning dry split cured oak and using 100,000 BTU’s per hour will require loading every 18.9 hours. This furnace burning dry split cured oak and using 150,000 BTU’s per hour will require loading every 12 hours. DESIGNED TO USE NON-TOXIC BOILER ANTIFREEZE ONLY. Our furnace was designed to have lower emissions and be far more efficient than the old outdoor wood boilers which in turn allows for far less wood usage! Burning wood clean and efficiently is a science not an art. Our combustion uses a turbo-sized forced air draft with the air forced in below the grates like a forge. Enhancing the 1100 degree temperature of the coal bed to get an air temp above the 850 degrees needed to combust the gasses in the firebox! Air forced in above the grates like most outdoor wood boilers use, cools the fire and has no comparison to a forge!! Burning of the gasses gives an additional 1/3 more heat as well as cleaning up the emissions. Burning dry wood allows full use of the woods’ heat whereas green wood uses 1/3 of the heat just to dry the wood! Dry wood uses free wind and solar to drive the moisture out of it not energy produced from the wood! Dry wood eliminates the corrosion of the fire box associated with green wood burners. Burning dry split cured wood almost eliminates creosote as it is burned up in the secondary burn of the gasses and is utilized as heat energy! Burning dry split cured wood will eliminate the majority of the smokey emissions associated with outdoor wood boilers. THIS IS NOT FOR BURNING GREEN WOOD LIKE THE OUTDOOR WOOD BOILERS. WHEN COMPARING US TO OTHERS ONLY LOOK TO OUTDOOR WOOD-FIRED HYDRONIC HEATERS TESTED BY THE EPA AS THEY ARE ALL INTENDED TO USE ONLY DRY SPLIT CURED WOOD! Outdoor wood furnace Outdoor wood boiler wood furnace wood boiler wood stove heater. The item “OUTDOOR WOOD FURNACE BOILER HEATER STOVE FREE HEAT” is in sale since Monday, January 23, 2012. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Water Heaters\Other Water Heaters”. The seller is “progsell” and is located in Warren, Minnesota. This item can’t be shipped, the buyer must pick up the item.

Universal Outdoor Wall Mounting Bracket for Ductless Mini Split A/C 9000-36000


Universal Outdoor Wall Mounting Bracket for Ductless Mini Split A/C 9000-36000


Universal Outdoor Wall Mounting Bracket for Ductless Mini Split A/C 9000-36000


Universal Outdoor Wall Mounting Bracket for Ductless Mini Split A/C 9000-36000


The use of mounting brackets raises the condensing unit above ground level for multi-floor mounting. As an alternative to ground level pads, some consumers find the use of mounting brackets useful for greater placement versatility and greater protection from dirt, snow, debris, floods, vandalism, etc. Universal Heavy Duty Outdoor Wall Bracket for Ductless Mini Split Condensing Units. Powder coated galvanized steel. Dimensions: Width: 33.5″ Height: 18″ Depth: 22. Adjustable for use with up to 9,000 – 36,000 BTU Units not exceeding a maximum weight capacity of 350 lbs. It includes hardware and expansion bolts for wall mounting. Cross bar, Two L-shaped brackets (foldable), Each arm has two upgraded 8.8 grade bolts with lock nuts, Wall fixation kit, Anti-vibration feet ungraded to 1 1/4 inches tall. Slight rearward tilt to wall is recommended for safety purposes. Before purchasing please make sure it fits your unit, check dimensions on the pictures. Bracket is designed for masonry wall mount, for stud wall mount proper blocking must be made between studs to insure proper wall bracing will accommodate bracket weight load. The item “Universal Outdoor Wall Mounting Bracket for Ductless Mini Split A/C 9000-36000″ is in sale since Thursday, January 31, 2013. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\HVAC Parts & Accessories”. The seller is “breezzone” and is located in South East. This item can be shipped to United States.

  • MPN: BPC-3LP-HD
  • Brand: DuctlessAire
  • Country of Manufacture: United States
Outdoor Wood Furnace Boiler Stainless Steel Pool Heat Exchanger 360,000 BTU



YOU DO NOT WANT PORTS ON SAME SIDE AS THE WATER TENDS TO TAKE THE PATH OF LEAST RESISTANCE AND ONLY FLOW THOUGH PART OF THE HEAT EXCHANGER. PORTS ON DIFFERENT SIDES MAKES THE WATER FLOW THROUGH ENTIRE HEAT EXCHANGER FOR BETTER HEAT TRANSFER. 360,000 BTU Stainless Steel Pool/ Hot Tub heat exchanger. For the hook up kit search for this item number. This unit is especially made for chlorinated pools. Our superior pool/hot tub heat exchanger is made of 316 stainless steel. This is the best quality on the market for better efficiency and longer life. If you have a SALT WATER pool, please see our TITANIUM pool exchanger listings. This unit has 1-1/2″ ports on the stove side and 2″ ports on the pool side. These can be easily increased or decreased with a fitting to fit your project. The length of this unit is about 35 inches. Listed below is a basic sizing chart. Use this table to determine which pool heat exchanger best suits your pool needs. Pool Capacity (US GAL). Shell Side Tube side. Construction Material: SS-316L SS-316L. Working Pressure 150 150. Minimum Temperature 18 18. Maximum Temperature 250 250. Pneumatic Test Pressure 165 165. All parameters are subject to change without prior notice. Designed according to ASME boiler and pressure vessel code SECC VII version 1. Andersons Outdoor Wood Furnace Center. We offer service even after the sale! 7 days a week! Over 10 years experience! This is all we do, so give us a call and let our knowledgeable staff help you. Tired of talking to dealers and sellers who don’t even know their own products? Unlike others, we service what we sell! Our feedback is earned! All others must call for a quote. We just want to take the time to thank your for the opportunity to service you and your project! We enjoy answering questions and helping your project run a little smoother! The item “Outdoor Wood Furnace Boiler Stainless Steel Pool Heat Exchanger 360,000 BTU” is in sale since Tuesday, April 30, 2013. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\Furnaces & Central Heating Systems”. The seller is “freeheat4u” and is located in Plymouth, Wisconsin. This item can be shipped worldwide.

  • MPN: 360K POOL HEAT EXCHANGER SS
  • Brand: american royal
  • Model: POOL 360000 SPLASH BTU
  • Pool Type: Chlorinated
Outdoor woodburning boiler



4400 Wood Master heavy duty outdoor wood burning boiler. Seven years old, heats 5,000 square feet. Will heat larger home or home/garage combination. East access, ready to move. The item “Outdoor woodburning boiler” is in sale since Thursday, September 13, 2018. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\HVAC Parts & Accessories”. The seller is “karesatkowia-0″ and is located in Sterling, Michigan. This item can be shipped to United States.

  • Brand: Wood master
  • Type: Boiler
  • Color: Brown
Mr Heater 20000 BTU Vent Free Blue Flame Natural Gas Indoor Outdoor Space Heater


Mr Heater 20000 BTU Vent Free Blue Flame Natural Gas Indoor Outdoor Space Heater


Mr Heater 20000 BTU Vent Free Blue Flame Natural Gas Indoor Outdoor Space Heater


Mr Heater 20000 BTU Vent Free Blue Flame Natural Gas Indoor Outdoor Space Heater


Mr Heater 20000 BTU Vent Free Blue Flame Natural Gas Indoor Outdoor Space Heater


Tools & Home Improvement. Patio, Lawn & Garden. Beauty & Personal Care. Pro Audio & Sound. Car Audio & Electronics. Sign Up for Our. Mr Heater 20000 BTU Vent Free Blue Flame Natural Gas Indoor Outdoor Space Heater. Fight back against the winter chill and be warm, cozy, and comfortable all season long with the safety, reliability, and performance of the Mr. Heater 20,000 BTU Blue Flame Natural Gas Space Heater. An ideal gas heating solution, this natural gas space heater is perfect for indoor or outdoor use and can take the chill out of any space up to 500 square feet. Use it as an outdoor heater or garage heater with the power of up to 20,000 BTUs per hour. You can mount this heater to a wall or set it up on the floor with the included legs and mounting hardware. Start-up is easy with the battery-powered electric ignition, plus you’ll have total climate control over your space with the built-in thermostat. This heater also features low oxygen automatic shutoff for safety and uses blue flame for a clean burn and even convection heating. Bring on the heat with a new ally this winter, the Mr. Take the chill out of any room or space, inside or out up to 500 square feet. Powered with reliable natural gas with an output of up to 20,000 BTUs per hour. Easily mount to a wall or secure to the floor with the included legs and wall mounting hardware. Convenient thermostat allows you to be in total control of the temperature, even on the coldest days. Completely safe operation indoors or outdoors with the automatic low oxygen shut-off system (ODS). Even convection heat with the blue flame burner provides a clean burn. Battery powered electric ignitions (battery included). Works well up to 4,500 feet altitude. BTUs: 20,000 BTUs. Heating area: 500 square feet. Fuel consumption: 0.02 MCF. Heating Product Type: Space heater. Heating Technology Type: Convection. Power Type: Natural gas. Recommended Location: Living room. Dimensions (L x W x H): 23.75 x 11.25 x 27 inches. Weight: 26.75 pounds. Enerco, based in Cleveland Ohio, has been at the forefront of infrared combustion technology since 1955. This market leading technology has allowed Enerco to build expertise in consumer heating products as well as heavy duty commercial and construction heating products. Starting in 1984, Enercos Mr. Heater Brand has delivered innovative technology and unmatched quality and service as Americas Most Popular Brand Of Heaters. From its Original Tank Top Series to its patented Buddy Heaters, millions of consumers have enjoyed high quality comfortable heat. Heaters Contractor Series Forced Air Propane and Kerosene Heaters have become the industry standard for dependability while its unit heaters have expanded the garage to usable workspace in the winter months. 2011 marked the launch of HERO-The Worlds First Cordless Forced Air Propane Heaters featuring Quiet Burner Technology®. Through innovative products, innovative marketing, and world class customer service, Mr. Heater is leading the way in portable heat! Questions about this item? Cancelling Your Order: Your order is important to us and will be processed immediately. Select the reason for the return. We welcome your inquiry! The item “Mr Heater 20000 BTU Vent Free Blue Flame Natural Gas Indoor Outdoor Space Heater” is in sale since Friday, November 8, 2019. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\Space Heaters”. The seller is “vm-express” and is located in Lincoln, Nebraska. This item can be shipped to United States.

  • Brand: Mr. Heater
  • UPC: 089301000858
  • Power Source: Gas
  • Recommended Environment: Indoor
  • Heating Wattage: 20,000 BTU
  • Voltage: 120 V
  • Width: 11.25
  • Heating Technology: Infrared
  • Height: 27 in
  • Features: Thermostat
  • Color: White
  • Room Coverage Area: 250 to 499 sq ft
  • Smart Home Protocol: Infrared
  • Mounting Location: Wall
  • Number of Heat Settings: 1
  • Manufacturer Color: White
  • MPN: F299721
Thermowind WaterLess Wood Outdoor Burner Furnace Forced Air No RUST


Thermowind WaterLess Wood Outdoor Burner Furnace Forced Air No RUST


Thermowind WaterLess Wood Outdoor Burner Furnace Forced Air No RUST


Thermowind WaterLess Wood Outdoor Burner Furnace Forced Air No RUST


Thermowind WaterLess Wood Outdoor Burner Furnace Forced Air No RUST


Thermowind WaterLess Wood Outdoor Burner Furnace Forced Air No RUST


Thermowind WaterLess Wood Outdoor Burner Furnace Forced Air No RUST


Thermowind WaterLess Wood Outdoor Burner Furnace Forced Air No RUST


Thermowind WaterLess Wood Outdoor Burner Furnace Forced Air No RUST


Thermowind WaterLess Wood Outdoor Burner Furnace Forced Air No RUST


Thermowind WaterLess Wood Outdoor Burner Furnace Forced Air No RUST


Thermowind WaterLess Wood Outdoor Burner Furnace Forced Air No RUST


Water-less TW1000 Wood Furnace. FYI: You don’t have bury Pex Pipe because there is NO Pex pipe; just simple water-tight ductwork! OR just use simple and inexpensive galvanized ductwork above ground. FEDERAL EPA LAWS are in effect now! Even for residential purposes , in MOST STATES. Outdoor wood BOILERS are now OUTLAWED in ALL 50 STATES! BUT this is NOT a BOILER!! Because the law only prohibits wood ” BOILERS ” in most states! FYI, p eople simply hate how hard the EPA models are to start and that it’s a full-time job to keep them running because with them, the wood has to be dried, under cover, for a minimum of two years! NOT THE CASE WITH THESE SIMPLE WATER-LESS FURNACES! These new EPA models have a refractory (much like a jet engine) that must use special fuel remember unleaded gas? Wood MUST have LESS than 20% moisture content; must be dried under cover for a minimum of TWO YEARS Who does that? Just like the cars of the 60s that had lots of power and got great gas mileage, used regular, less expensive gas, had gobs of power and could smoke the tires; then the EPA got involved and cars suddenly had 1/2 the horsepower and only got about about half the gas mileage and became dogs with catalytic converters! HyProTherm FORCED AIR OUTDOOR WOOD FURNACE. This Model: ThermoWind 1 000 is Rated to Heat 4375 sq. Well insulated in COLD PA climate (More in southern climates). (No water to freeze; NO rust, NO chemicals needed). Shown using optional insulated. You DO NOT need to do it this way. It is only an option! Well-insulated, in a cold PA weather (MORE in milder climates) The LEAST EXPENSIVE EPA ALTERNATIVE! Legal in 49 States! Now available with the CAST IRON GRATE OPTION! Write to me and I will list one with cast iron grates for you. HyProTherm has done it again! Backed by our 47 years of experience, we have developed a FORCED-AIR Furnace that doesn’t need water! This furnace can go outside and does not have to be bolted to the house or go in the basement like every other model out there! Heat is carried to your home through insulated 12 pipes, which CAN be buried underground. No more worries about frozen water. NO CHEMICALS or annual water tests! Perfect for folks who have power failures often or those people with cabins or homes that are left unattended. NOW there is no need to put the furnace right next to the house or in the basement! Eliminate the threat of fire by having the furnace away from the house just like with our outdoor wood fired WATER furnace. No carrying wood into the house, along with the bugs, bark and trash. No smoke indoors either! These air pipes are only 12″ in diameter so a standard backhoe with a 24″ bucket can easily dig a trench for the pipes to lay side-by-side. Air and Water-Tight 12 Underground Ducts. GREEN BUILDING Approved Adhesives. HyProTherm’s founder has been building furnaces 47 years; since 1972! Our furnaces have stood the test of time and these WILL last even longer with no rust to deal with! Although our forced air furnaces are a newer line, they are built using the same thick materials, familiar design and proven techniques that we have been using for 47 years. Perfect for folks who have power failures often or those people with cabins or homes that are unattended. No worries about water freezing ever again! 2009 version with smaller door. Two OPTIONAL buried 12 pipes carry the heat to the house and the cooler return air comes back. OR you can use less expensive insulated galvanized pipe – above ground! The FIRST and SIMPLEST in the industry! We custom build every furnace for you , so when you order, you can specify YOUR choice of. 17 great c o l o r s : NO EXTRA Charge and over 8000 Color combinations! Our furnace is SO strong, we can suspend it from the chimney alone! This is how we move and load every one of them! Had a little fun with Photoshop here but this is really being lifted and moved by the chimney, made of 1/4 thick steel; that’s as thick as or thicker than most fireboxes! That’s the way we always move and unload them when we deliver them, every day :o . The best stove made. Best Outdoor Wood Burning Furnace Stove -Outside Boiler 40 yrs (No) Dent SALE (#190828779573). Best Outdoor Wood Burning Furnace Stove -Outside Boiler 40 yrs (No) Dent SALE (#190827370429). Thank you for the furnace. Best Outdoor Wood Furnace Stove – Outside Boiler 37 yrs (#190331731343). Item as described , very helpful , A+++. Reply by aware (Mar-09-08 18:06). We’re glad you like the Best Outdoor Wood Burning Furnace! Reply by aware (Mar-15-08 19:13). We’re glad you like our Outdoor Wood Burning Furnace! Reply by aware (Nov-03-07 10:12). Nice looking furnace worth to have delivered set on pad by nice helpful workers. Reply by aware (Oct-29-07 17:00). Reply by aware (Oct-25-07 14:39). I talked to the boss, and twisted his arm, and.. Now with even MORE and BETTER INSULATION! A combination of ceramic superwool. A n d insulation from Knauf. More R value than in a house! BOTH are a state-of-the-art insulation that fights heat loss three ways; radiation, conduction and convection heat losses. Superwool Plus (classification temperature: 1200°C). KNAUF 1000 degree Blanket. Fed up with High Oil and Energy prices? Smoke in your house? Bugs, trash, bark from carrying wood in? Heat your whole house with a clean, efficient Forced-Air OUTDOOR WOOD FURNACE! No smoke in your house anymore! These furnaces don’t burn up the oxygen in your house or suck cold air in from outside! Save your lungs and help prevent allergies too. WOOD is still cheap! And large un-split logs – like this furnace uses – are the least expensive of all! Have Clean Heat, Clean Air, Clean Floors and walls too! (generously pro-rated years 6-20). Who else offers that, who has been around 47 years? A lot of warranties only cover parts (not labor)! Ours covers Parts AND Labor for TWENTY YEARS! Note that he wood is not burning; the GASES ARE! Building Quality Wood Furnaces for 47 Years. We are actively looking for dealers in ALL STATES and Canada! We now have a dealer and a Kiln, in the UK and a dealer in France, a dealer/home builder in the Ukraine and one in Spain! MORE of OUR FURNACE BUYERS SAID. Best Outdoor Wood Outside Boiler – Furnace Stove 37 yrs (#190341274667). Can’t wait to get those low gas bills this winter! Best Outdoor Wood Outside Boiler – Furnace Stove 37 yrs (#120482376608). They answer any questions you have. Outdoor Wood Furnace Stove – Outside Boiler -Since 1972 (#190332576451). Good to deal with nice people. Very Good Deals On Very Good Products. We’re glad you like the Best Outdoor Wood Burning Furnace. Great to work with. Wounderfull working with him. Reply by aware: We’re glad you like our Outdoor Wood Burning Furnace! As nice, courteous, and helpful a sellers as you will EVER find! Would recommend excellent service thanks guys. Wood Boiler seems like a great unit. Yet to hook it up. We make it simple without a lot of expensive electronics to break. We make it user serviceable. Anyone can maintain our furnace! No filling with water every week – or EVER! We give accurate BTU ratings using an established scientific formula. They say what sounds good. We have a 2-light motion detector light on the front (not installed). We have a forced-air fan; not a dismal damper to fuel the fire with oxygen. Our inducer fan is in the back , at the bottom, behind a big door, where you can’t get shocked AND it blows the air through the grate into the bottom of the fire LIKE A BLACKSMITH’S FORGE – NOT into the side of the fire! Fires burn from the bottom up, right? We have been building fine energy efficient furnaces for 4 7 years! Our standard grates use super THICK 3/4 Bar Stock! Scroll do for more information. This Model: HyProTherm ThermoWind 1 000 is Rated to Heat up to 4375 sq. Well-insulated in COLD PA climate (More in southern climates). As a test of burn times, the owner of HyProTherm Furnace took the thermostat off his 25 year-old water furnace, so that the fire would rage at maximum burn 24 hours a day. Yet he still only has to load it every 12 hours, at maximum burn – never shutting off! Normally, he goes as long as 24 hours without reloading it. I get a wh o le day with m i ne! A n other customer called and told me he goes 18 hours between loads (1/17/08). Don’t believe the hype and misinformation about 43-98 hour burn times. This is only true in the summer. Forced-Air furnaces tend to get even longer burn times. Shown ready to hook up to the OPTIONAL insulated underground ducts. NO risk of water freezing! No chimney fire risk either! No logs to carry in means no messy ashes and bugs in the house! The chance of carbon monoxide build-up in your home is eliminated. Eliminate allergies by getting the smoke outside! The chance of a gas explosion from your furnace in your home is eliminated. Indoor pollutants of harmful gases and fumes are eliminated too. Eliminates the chance of chimney and flu fires from your furnace. If you live in a suburban or rural area near a source of cheap wood, you could heat your home for the entire season for the cost of one month’s electric heat bill. An outdoor furnace requires less tending. No inside oxygen is used to fuel the heat like other wood or gas burning units. Does not cause respiratory problems like burning wood indoors. Instead of 12-18′ wood split, you can put 30 pieces in this one and full rounds. Burning wood, a total renewable resource, is less expensive than other fuels. The cost of electric, gas, oil, or propane can be very erratic. The low cost of wood remains constant – or FREE! The furnace hooks up to any existing gas pack, heat pump or forced air system; even buildings with no ductwork or existing heating system ca use it. Most people pay for their furnace in 2 years or less! Where else can you get that? An outdoor wood burning furnace is the BEST INVESTMENT! C an take up to 3 min on a n old modem to load the whole page. A n older water furnace is shown here for color. Get the Bugs, Dirt, Wood and Smoke outside. Your lungs will love you! Many people are getting lower rates because they are getting the fire and related hazard, out of the house! Extra large, 2 foot by 2 foot, waist high loading door. No more bending over, straining your back to load wood! Lever action safety latch! A PROVEN design – since 1972! We feel we build the safest furnace (nothing electrical outside). We have the BEST PRICES and a Very Friendly Staff to help you every step of the way. These furnaces now come with a double flood light on the front, for ease and safety of loading the wood at night. Not only that, it’s a MOTION LIGHT! No forgetting to turn it off. If it’s dark outside and you go near the furnace, it turns on! New, nicer looking furnace – NO SILICONE Now with nice neat looking butyl tape and grommets. The door IS HUGE! Remember, a smaller 15″ round log, 30″ long, will weigh 112 lb – more than most people can ever lift! Trust me, the door is more than big enough for anything you can lift into the furnace AND the thick door frame will take a pounding as you throw them in! 2 4 ” x 2 4 ” – The TOUGHEST door you’ll ever find with TWO 1/4″ solid steel plates separated by a 3″ air shield; filled with the BEST EVER Ceramic Wool Insulation insulation. This inner plate keeps the hot air in and deflects it off the door. With very little metal to transfer heat to the door it does an excellent job of insulating the door. There is also fiberglass insulation BETWEEN the plates now! Very heavy duty hinges! OURS won’t fall off! The chimney is low on the firebox, so that the smoke – or more importantly, the gas and heat – is trapped so that it doesn’t quickly escape out the flue. That would be a big loss of efficiency. This way the air has to cool off to find its way down and out the chimney. This is also a better idea since you don’t have hard-to-clean baffles getting a creosote buildup on them. Having the chimney come down low and stops the heat, gases and smoke from rushing right out the chimney AND creates a HUGE Secondary burn chamber to burn off all the gases from the wood – a HUGE source of energy! When wood starts to burn it’s the gas that burns first! Another advantage is that the chimney exits through the air chamber, further heating it up – for free! These are some of the reasons that our water furnace is one of the most efficient on the market. This also means that you will burn less wood than with others and therefore you will use more wood with the other – being less than 75% efficient. That’s proof, not just rhetoric. 125 and another at. Our standard THERMOWIND firebox is 1/4″ to produce heat for you FASTER Optional 3/8″ [50% thicker] and 1/2 THICK [100% ticker] available. We have never had a firebox failure, crack, split, rust-through or leak in 4 7 years of building furnaces. We have an ash pan! Some other makes don’t even have an ash pan!! That makes it HARD to clean out! You have to let the fire die down or move the burning wood aside to scoop out hot ashes. It WILL NOT RUST through in a lifetime! Will not get stress cracks like Stainless Steel! We have furnaces 30 years old and more, still in use today! The removable, replaceable grate is made out of THICK 3/4 inch bar stock. Now THAT IS VERY thick! We have NEVER had one burn through! (Most others are a thin 3/8 – 1/2). Now available with optional CAST IRON GRATES. A sh pan and door. And you can see the air inducer blower inlet tube (seen in back of this picture). The blower in the back is a great aid in getting a fire started. It also recovers the air temperature much quicker, and burns the wood up more completely because oxygen is being fed to the bottom of the flame – like blacksmith feeds his fire! A clean-burning fire is more efficient than a smoky air-restricted fire. The forced draft will burn hotter and therefore cleaner. Secondary gases burn at 1200 degrees and with our furnace, they are trapped in the firebox so that they are available to be burnt off without escaping out the chimney. The HyProTherm will exceed that temperature in the firebox. The thermostatically controlled, forced air induction blower determines how hot the fire burns and therefore how hot the air in the furnace gets. A thermostat on the back of the furnace tells the blower when to turn on and off (and has a solenoid activated door) , so it doesn’t run all the time and waste wood. This is a LOT more efficient than a manual damper will ever be! The air blows into the bottom of the fire, through the grate – like a blacksmith’s forge. That’s better than blowing in from the front – into the side of the fire, as all others do (if they even have a fan). You get more complete burning from a fire where the oxygen is fed through the bottom as opposed to blowing over the fire from the side, like others that have that big box on the door! Actual photo of a fire inside our firebox, only minutes after reloading with wood and the GASES are burning! This firebox size is 36″ wide 34″ tall by 28 deep , You can use 2 foot logs! The air chamber totally surrounds the firebox, top, sides and rear. The chimney is also surrounded by air. Full-sized forced air fan for your home or building and a forced air fan for furnace induction, with solenoid activated damper to shut off air supply when the fan turns off; saving you wood! Simple fan(s) temperature controller shown here Furnace is BLACK ALL OVER. A bigger, quieter, smoother 2000+ CFM blower 33% bigger than in most homes! Installed standard – on left above. The fan will not turn on until the air temperature is 125F or higher, so that you don’t have cold air blowing into the house. You get a solenoid activated inducer blower with damper too! All parts are available everywhere. Most common and inexpensive method: Ducts through a basement window or crawlspace or under mobile home! The Army Corps of Engineers built a chase around the ductwork and filled it with standard fiberglass insulation to keep the ducts warm and dry. They used the same material as was on the side of their building to give it a uniform appearance and you can do the same. 12 round to square ductwork. NOW there is no need to put the furnace right next to the house or have unsightly ductwork going across the yard! Have the furnace away from the house just like with our outdoor wood fired WATER furnace s. The two connectors in the back hook up to the INSULATED blue pipes which are buried in the ground, either with standard 12 inch galvanized ductwork, that you would insulate yourself or you can use the black pipe shown at the top of this ad. This is the same as the blue duct work and is specially designed and made for our furnaces. These pipes are only 12″ in diameter so a standard backhoe with a 24″ bucket can easily dig a trench for the pipes to lay side-by-side. Ideal for new construction under a slab or basement, as you can see here but you would just need two pipes running to the house in an existing structure to connect to your ductwork. ________________________ Here are photos from a lady installing the BlueDuct by herself. This is our original style of firebox which we loved because there were no welds to make the firebox except for two to weld the end-plates on. Our new firebox is much the same because utilize a 430-ton press brake to form one piece of metal into the shape of the firebox. It also has two end-plates that are welded and we weld it to the floor, which is also the air- jacket bottom and is the same thickness as the firebox. No one else in the world does this! Instead of 12 welds to weld 6 flat slabs of steel together, we have just 4; two-thirds less! Our new removable ash pan is easily cleaned at the front! Some other makers don’t even have an ash pan! You have to let the fire die out or shove the hot burning logs aside – then clean it out while the firebox is 800 to 2000F degrees – and then restart the fire in the dead of winter! Who wants to do that? Air surrounds the firebox and back as well. Extracting all the heat. There is a 75 CFM air induc er/blower that feeds air into the firebox, below the grate, to feed oxygen to the fire. It is thermostatically controlled and solenoid activated for greater efficiency, to keep the air temperature in the furnace between certain parameters. This is far better than an inefficient manual or natural draft opening. Smaller TW1000 model, HOT AIR FURNACE. Our furnace is so strong and well-made, that the chimney alone is strong enough to carry even the 3680 lb. Weight of our biggest water furnace! We move them like this every day! Exterior is made of Heavy Duty Siding – 29 gauge structural quality, full-hard steel. 10 layers of protective coating. 1 7 c o l o r s to best suit your surroundings! Mix and match the roof, roof trim, sides and corners and even the front can be a different / darker color so it doesn’t show the smoke stains as much! There are legs on the bottom, that you can’t see, with the siding surrounding the bottom to ground level. Concrete pad is recommended but not necessary. Use railroad ties, solid concrete blocks or? The chimney is made out of 1/4 thick, solid steel pipe and is surrounded by the air chamber, to extract even more heat. It tops out at about 90 feet above ground. You can EASILY add standard 6 stove pipe extension(s) with our FREE adapter (ask for it when ordering). Some other manufacturers have to have the whole hull removed by 2-3 people! R ear access hinged door. All electrical items are in back, safely behind the door/lid! Easy pipe (air) and electrical hookups (simple 110V wiring). No special tools needed. The easiest furnace for the self-installer to put in! 95 % of our customers install our furnaces themselves! We help you every step of the way! DOES NO HALF TO BE SPLIT EXCEPT WHEN TOO BIG OT TOO HEAVY TO BE CARRIED, Many people can pay for their furnace in a year and a half of oil or propane bills! Seriously, you can use these bigger, cheaper pieces or smaller ones – whatever you can easily handle. ANY wood is cheaper than oil, gas and electricity! One person said that they have never used their propane heater after propane prices tripled! Whole rounds burn longer and cleaner and it’s SO NICE not having to split the wood! Shove the logs in on top of each other. Use the big, thick poker (provided) for safety to push them in. That big poker comes with the furnace – for FREE! Thought there wasn’t a fire? It can look as dark as night in the firebox, but within a couple of minutes – literally – this fire was roaring! It also has two end-plates that are welded and we weld it to the floor, which is also the water jacket bottom and is the same thickness as the firebox. We use state-of-the-art Solar Guard insulation all around, on top of the Knauf 1000 degree insulation! Solar Guard is only 1/4 thick but combines a thermal break, reflective insulation and an insulating layer of R11.6! It has backing on both sides and is aluminum foil backed on one side. TRIPLE INSULATED (OVER R56) ON TOP – like a passive Solar house. You cannot feel the heat when you touch the siding! That gives you R23.1 in the walls and now R56.8 in the ceiling! FREE in Northern U. NOW FREE with THIS AD! Blocks radiant energy, heat conduction and convection. COMBINED with Ceramic Superwool on the front (white – at the firebox) where temperatures can be 1200F and Knauf insulation blanket (brown) on the side, insulating the air jacket, which is below 200F – for superior performance all around! Fed up with sky high High Oil and Energy prices? Heat your whole house with a clean, efficient OUTDOOR Forced-Air WOOD FURNACE! NO bugs, no bark, no saw dust! They don’t burn up the oxygen in your house or suck cold air in from outside! Have Clean Heat, Clean Air, Clean Floors and walls! ALL HyProTherm water-less furnaces, have a. On-Site and 100% paid for the first 5 years! Years 6-20 very generously pro-rated! A lot of warranties only cover parts (not even labor)! A gentleman called me and told me his 2-year old C_____l B____r was leaking! NO LEAKS with a Water-Less Furnace! NO LEAKS, NO RUST, NO CHEMICALS. Building Quality Wood & Coal Furnaces for 47 Years. OUR FURNACE BUYERS SAID. Best Outdoor Wood Outside Boiler – Furnace Stove (#190341274667). Best Outdoor Wood Outside Boiler – Furnace Stove (#120482376608). Best Outdoor Wood Furnace Stove – Outside Boiler (#190331731343). We’re glad you likeOutdoor Wood Burning Furnace! We make it simple without expensive electronics to break down. We have a 2-light motion detector light on the front (Not installed for your protection). We have an induction fan not a dismal damper to fuel the fire with oxygen. Our fan is in the back , behind a door, where you can’t get shocked AND it blows the air through the grate into the bottom of the fire JUST LIKE A BLACKSMITH’S FORGE – NOT into the side/front of the fire! Customer Easily Replaceable POTABLE Hot water coil. Most others don’t even have one! Our grate s use 3/4 Bar Stock! Many others don’t even have any grates. This Model: ThermoWind 1 000 is Rated to Heat up to 4375 sq. (Well Insulated – In a PA type of cold) More down south where milder. TW1000, TW2000 and TW3000. As a test of burn times, the owner of HyProTherm Furnace took the thermostat off his 25 year-old furnace, so that the fire would rage at maximum burn 24 hours a day. Yet at MAX burn, he still only has to load it every 12 hours. A customer called and told me he goes 18 hours between loads (1/17/08) I GET 24 hours and o thers have reported 24 hour burn times! We will always size the furnace for you to achieve once a day loading (24 hour burn), if you want it! There is no negative to getting a bigger furnace, like this one because it is not like purchasing an air conditioner where if you get one too big, it becomes inefficient. It is simply like getting a bigger fuel tank so that it will hold more fuel and you will need to fill it less often. Don’t believe the hype and misinformation about 42-98 hour burn times. Our most popular color – Evergreen with Black trim. Please allow 4-5 weeks for you furnace because every furnaces is custom built for you and fitted with YOUR choice of 17 available colors. We will build YOUR furnace in any of 17 exciting colors or any combination thereof! Just a few EXAMPLES of Color Combinations. Black Front Cocoa Sides. TW3000 water-less Brown All Over. White with Brown Corners. Brick Red & Black. Black with White Corners. Bright while & red. Black front Taupe Sides. Th ermoWind furnace Black front green corners. Older model but the same 1/4″ chimney, welded into the 3/8″ firebox, carrying the whole 2175 lb weight! Older design (with smaller door) but the same colors available! L OTS of Different colors and ALL come with motion lights! Water furnaces shown here to show assortment of colors. Ocean Blue with White; White and Red; Ivory with Brown; Green with Black; White with Black; Ivory with Green. Not all colors are available at all times. We can also build your furnace so that you can apply regular siding, brick, faux (cultured) stone or almost anything else. Write to me and I’ll list one for you. Questions about stainless steel answered. Do you build with stainless steel? No, we don’t build stainless for several really good reasons. Our furnaces last longer than stainless with MANY of our water furnaces still in use after 30 years plus!! Mild steel transfers heat better than stainless does. Stainless is a great sales feature, but little else, since most companies use cheap stainless, like a car’s exhaust system. There are many grades of stainless out there. Since stainless is so expensive, the fireboxes are made really thin. Some are no thicker than the metal in a 55 gallon barrel or the thickness of a trailer fender!! That’s why you see so many split and broken apart. Our optional firebox on water-less furnaces, is 1/4 thick – normaly found on traditional boilers, giving faster heat tranfer! Our optional firebox on boilers, is almost. 500 inches thick (HALF INCH) as opposed to. 200 in many furnaces. Just 31 thousandths shy of 1/2 inch!! They never rust through. Stainless is more prone to stress cracks, so why use it? Unless the stainless is retreated after welding, you’ve lost all of it’s properties through the heating of the metal. And it’s being welded to mild steel anyway, so what’s the use? Like I said, it’s a great sales feature but our super thick mild steel furnace heats better, doesn’t crack and split – and last longer! If stainless was better, we’d surely be using it after 47 years of experience. The potential for electrical shock is something we have tried to totally eliminate. That is why unlike our competitor’s stoves, our stoves do not have electrical control boxes, draft fans, etc. We believe these impose too much risk should a problem ever arise. We also believe that to have anything too complicated on a wood furnace is unnecessary. We have made our furnaces to be simple, and reliable and we have proven that with 47 years of use. We do not have complicated self-fill, bladders or water level indicators on our furnaces. You don’t need them with Forced-Air! These stoves were developed by us, for our own use. We started making them for others slowly and now our stoves are well known locally for their simplicity, and their maintenance-free operation. Forced-Air Wood Furnaces are indeed an excellent, almost zero-maintenance heating choice. HyProTherm Furnace is a privately held company and was established in 1972. Heating and Air company preceded it and dates back to. Billy (the son) and his Dad (Gerald) were in the heating and air business for decades. They began to develop their first prototype. For their own home. In the 60’s. Gerald Shaver knew there had to be a better way than to pay for oil, even though it was cheap back then. His main concern however, was to get rid of the smoke and ashes in the house. It was obvious it could cause serious health problems. Besides the soot all over the place was a chore to clean. Having the wood outside already, made the plan simple. Put the wood stove outside! He developed a model for himself and continued to improve on it over the years. Our furnace was indeed the first. The last revision was made in 2009 and the furnace remains unchanged, except for cosmetics, today. Now Gerald’s son Billy heads up the business. Billy and Ray developed this. NEW Forced-Air Wood Furnace. We have been in business for 47 years and we are a family run business. We are a brick and mortar business in Salem Arkansas – and we are here to stay. We stand behind the quality of our furnaces 100%. We believe that we can give you a quality furnace and save you hundreds if not thousands of dollars at the same time. See My Great 100% Perfect Feedback! How is Feedback Percentage calculated? Member since: Apr-05-98 in United States. More Feedback received on the HyProTherm Outdoor Wood Furnace, over the past twelve years! Reply by aware: We’re glad you like our Outdoor Wood Furnace Boiler! Great ebayer five stars!!! Great people to deal with. Reply by aware: We’re glad you like your Outdoor Wood Burning Furnace! Reply by aware: We’re glad you like your Outdoor Wood Burning Furnace. First 5 years On-Site! One-year on fan and thermostat. From Salem, Arkansas 72576 It may vary slightly because MapQuest uses car routes whereas we have to use truck routes. Thanks for looking and have a great day! 2006, 2007, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015. 2017 , 2018 , 201 9. The item “Thermowind WaterLess Wood Outdoor Burner Furnace Forced Air No RUST” is in sale since Wednesday, June 26, 2019. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\HVAC Parts & Accessories”. The seller is “aware” and is located in Salem, Arkansas. This item can be shipped to United States.

  • Modified Item: No
  • Country/Region of Manufacture: United States
  • Custom Bundle: No
  • Depth: 62″
  • Width: 48″
  • Model: TW1000
  • Finish: Metal
  • Non-Domestic Product: No
  • Type: Water-less
  • Material: 17 Colors – Steel
  • Color: Multicolor
  • Year Manufactured: 2019
  • MPN: TW1000
  • Height: 87″
  • Brand: Hyprotherm
Smudge pot return pipe outdoor camp orchard heater deisel keroseen tin elbow


Smudge pot return pipe outdoor camp orchard heater deisel keroseen tin elbow


Smudge pot return pipe outdoor camp orchard heater deisel keroseen tin elbow


Used smudge pot in great working condition. I have smudge pots available in several styles and price varies depending on condition and style. Please check out my other auctions to see some of these other smudge pots. These heaters are fantastic for taking the chill off almost anything. I include simple printed instructions on how to use these heaters. These heaters put out an amazing amount of heat and very little smoke once they get burning. This is an orchard smudge pot that is commonly called the Hard Hat type and has a two piece flew pipe with three inch return pipe. Very hard to find in such nice condition and The Hard Hat or Return Pipe was also the best of all the styles of heaters produced. The tank on this heater is about 20-inches in diameter and 8-inches tall. The flew pipe disconnects from the tank lid section which also disconnects from the tank. It is easy to break down for transport and very easy to put back together usually requiring no tools at all. They are almost 5-feet tall when assembled. Great for hunting camp, ice fishing, keeping equipment warm, works great to have heating up the area around you while working on trucks or equipment outside in the winter, looks nice as a landscaping piece, use in orchards or for even just one or two fruit trees, and anything else you want. Please see my other auctions for additional and other styles of smudge pots, thank you. I have some smudge pots that are for yard art only at a reduced price that can be listed. The item “Smudge pot return pipe outdoor camp orchard heater deisel keroseen tin elbow” is in sale since Thursday, April 25, 2019. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\Space Heaters”. The seller is “poorfish1″ and is located in Parma, Idaho. This item can be shipped to United States.

  • Power Source: Diesel
  • Heating Technology: Convection
  • Features: Tip-Over Safety Switch
  • Color: Gray
  • Manufacturer Color: Gray
  • Control Style: Dial
  • Recommended Environment: Outdoor
  • Voltage: 120 V
  • Height: 16.69
  • Room Coverage Area: 1000 to 1249 sq ft
  • Material: Steel
  • Energy Star: Compliant
  • MPN: KFA50DGD
Outdoor Wood Stove Furnace Acme 235 Model Coal Wood Boiler


Outdoor Wood Stove Furnace Acme 235 Model Coal Wood Boiler


Outdoor Wood Stove Furnace Acme 235 Model Coal Wood Boiler


Outdoor Wood Stove Furnace Acme 235 Model Coal Wood Boiler


Outdoor Wood Stove Furnace Acme 235 Model Coal Wood Boiler


Outdoor Wood Stove Furnace Acme 235 Model Coal Wood Boiler


Outdoor Wood Stove Furnace Acme 235 Model Coal Wood Boiler


Our Firebox thickness is 3/8 rolled plate; not 1/4 or less. Our Water Jackets are 10 gauge, twice as thick as others. We make Our Acme 235 furnace that is compatible with most Household and Shop applications 5500 sq. This Model has a 34 x 36 x 26 fire box and hold 235 gallons of water. And provides 235,000 BTU to be divided between your buildings. The 235 Furnace measures 5W x 6L x 8T and weighs 1850 lb. There is a 10 inch tall ash compartment with a separate door for easy ash removal and a better burn. This model again will heat approx. Or provides 235,000 BTU to be used so there is no need to up size to heat your home and shop/garage if you don’t have to. We Insulate our furnaces Front, Back and Bottom with 6 inches of insulation and the Top with 12 inches, then we add another layer of protective insulation barrier to insure the least amount of heat loss. We have a Separate door for the most efficient and easiest ash removal. No need to let the fire burn down to remove the ashes! Our competitors use a flimsy light flew pipe that will burn out in the first year. We use 1/2 wall Chimney pipe, compare that to any on the market. Acme Furnace uses a thermostat controlled blower that blows up through the bottom and in to the firebox like a Blacksmith Forge, for a forced air draft. Not through the door and over the top of the fire or even worse a natural draft that takes forever to react when you need it. There are many colors to choose from, we have almost any color combination you need to match your surroundings or to make a color statement. With Acme Furnaces you pick your Siding color, Roof color and your Trim color! They can all be the same or any combination! Your Acme Furnace is Built Ready to use with 1 Pump, 2 ports (more available at no charge) 1 Blower, 1 thermostat, 1 Blower controll unit with a solenoid control. YOU PICK YOUR COLORS! Ready to Go for the Price we Advertise! We haven’t changed our price in the 12 years we have been build our Furnaces! Before you choose one of our competitors make sure their furnace is Ready to hook up like an Acme Furnace Ill bet youll be suprised! Acme Furnace Company understands that we build Furnaces with the Working Man/Women in mind. No bells and whistles to cause unneccessary problems. Acme Furnace Company Stands Behind Our Product! The item “Outdoor Wood Stove Furnace Acme 235 Model Coal Wood Boiler” is in sale since Sunday, July 22, 2018. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\Furnaces & Central Heating Systems”. The seller is “buildinhighwayd” and is located in Emden, Missouri. This item can’t be shipped, the buyer must pick up the item.

  • Location: Outdoors
  • Country/Region of Manufacture: United States
  • Power Source: Wood / Coal
  • Brand: Acme Furnace
  • Material: Wood/Coal
Mr. Heater MH200CVX 200,000 BTU Portable Outdoor LP Propane Gas Convection Heat


Tools & Home Improvement. Patio, Lawn & Garden. Beauty & Personal Care. Pro Audio & Sound. Car Audio & Electronics. Sign Up for Our. Heater MH200CVX 200,000 BTU Portable Outdoor LP Propane Gas Convection Heat. Keep your constructions sites or workshops nice and toasty as the temperature starts to drop with the Mr. Heater 200,000 BTU propane convection heater. This portable convection heater runs solely on liquid propane. It can hold a propane tank up to 100 pounds for 29 hours of continued use on low power. The Piezo push-button igniter easily starts every time and the single-knob control regulates output between 75,000 to 200,000 BTUs per hour. A 10-foot hose and regulator are included for easy installation. Don’t let the size of the Mr. Heater propane convection heater fool you. This little, but mighty machine really knows how to warm a room up to 5,000 square feet. Powered by liquid propane to heat up to 5,000 square feet. Runs up to 29 hours on a 100 pound tank on low power or 2.16 hours on max power. Piezo push button igniter easily starts every time. Single knob to control heat between 75,000 to 200,000 BTUs per hour. Instant locking chamber for easy assembly. 10 foot hose and regulator included. Heating product type: Space heater. Heating technology type: Convection. Dimensions (L x W x H): 19.2 x 16.5 x 18.5 inches. Weight: 19.2 pounds. Enerco, based in Cleveland Ohio, has been at the forefront of infrared combustion technology since 1955. This market leading technology has allowed Enerco to build expertise in consumer heating products as well as heavy duty commercial and construction heating products. Starting in 1984, Enercos Mr. Heater Brand has delivered innovative technology and unmatched quality and service as Americas Most Popular Brand Of Heaters. From its Original Tank Top Series to its patented Buddy Heaters, millions of consumers have enjoyed high quality comfortable heat. Heaters Contractor Series Forced Air Propane and Kerosene Heaters have become the industry standard for dependability while its unit heaters have expanded the garage to usable workspace in the winter months. 2011 marked the launch of HERO-The Worlds First Cordless Forced Air Propane Heaters featuring Quiet Burner Technology®. Through innovative products, innovative marketing, and world class customer service, Mr. Heater is leading the way in portable heat! Questions about this item? Cancelling Your Order: Your order is important to us and will be processed immediately. Select the reason for the return. We welcome your inquiry! The item “Mr. Heater MH200CVX 200,000 BTU Portable Outdoor LP Propane Gas Convection Heat” is in sale since Friday, November 8, 2019. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\Space Heaters”. The seller is “vm-express” and is located in Lincoln, Nebraska. This item can be shipped to United States.

  • Brand: Mr. Heater
  • UPC: 089301000216
  • Power Source: Propane
  • Recommended Environment: Outdoor
  • Heating Wattage: 200,000 BTU
  • Width: 18.400
  • Heating Technology: Convection
  • Color: Silver
  • Mounting Location: Garage
  • Material: Steel
  • Number of Heat Settings: 1
  • MPN: F270500