Just another WordPress weblog

Tile Backer Board Insulation Floor Panel XPS Cement Coated Fibre Mesh Top Qualit


Tile Backer Board Insulation Floor Panel XPS Cement Coated Fibre Mesh Top Qualit


Tile Backer Board Insulation Floor Panel XPS Cement Coated Fibre Mesh Top Qualit


Tile Backer Board Insulation Floor Panel XPS Cement Coated Fibre Mesh Top Qualit


Tile Backer Board Insulation Floor Panel XPS Cement Coated Fibre Mesh Top Qualit


Tile Backer Board Insulation Floor Panel XPS Cement Coated Fibre Mesh Top Qualit



Tile Backer Board Insulation Underfloor Heating Wetroom Cement Coated 6, 10 & 20mm. Cosy SpaceTile Backer Boards offers extra strength and rigidity to provide a quick andeffective solution to waterproofing and insulating. It is ideal for thin-bed tilling on walls and floors. With CosySpace Tile Backer Boards, it is easy to replace the traditional bathroom withan easy access shower area that is simple to clean and features a modern/ minimal design. It is easy to create a complete waterproof background for a modern andwatertight wet room. Product description Cosy SpaceTile Backer Boards are made from XPS foam boards (CFC free, blue closed cellcore) in core and coated with mesh and polymer cement mortar on bothsides. This makes the tile backer board an ideal base for setting tiles usingthe thin-bed process. The XPS foam board within is 100% waterproof and offers exceptionalresistance to water vapours. As proof, these panels meet the most stringent standards of ASTM and ANSI who perform tests for waterproofing and test for suitability for use of a waterproof installationwhen seams and fastener heads are properly treated. Thermally insulating Waterproof and dimensionally stable Low weight, one board (1200 x 600 x 10mm) is around 1.8KG Easy to cut (by knife or Saw). Excellent for wet rooms Excellent sound insulation (12mm board, 20 db). Your variation choices are as below. 6mm boards- Pack of 20 Boards which cover an area of 14.40m2 – Total Gross Weight 24KG. 10mmBoards – Pack of 10 Boards which cover an area of 7.20m2 – Total Gross Weight 21.60KG. 20mmBoards – Pack of 10 Boards which cover an area of 7.20m2 – Total Gross Weight 29KG. Tile Backer Board Insulation Floor Panel XPS Cement Coated Fibre Mesh Top Qualit. Aberdeen – AB (except 37-38, 55-56), DD8-11, KW15-17, ZE 1-99, GY1-99, JE1-99. OBAN – PA20, PA21-33 & 35-49, PH49-50, PA34 Mainland, PA34 Island, PA60-PA61, PA62-72, PA74-75 & PA77-78, HS9-99, PA80. Inverness – KA27-28, HS1-8, IV41-51, IV1-32, 36-40, 52-54, 63, AB37-38, 55-56, PH19-26, 30-35 KW1-14. BFPO (via Hayes) – BFPO 01 – BFPO 01-999. Isle of Man (via preston) – IM1-99. Scilly Isles (via Truro) – TR21-25. If you are not happy with your item please return in the original packaging and with all tags attached within 30 days. We are here to answer any questions you may have. 11-04-2018 15:40:17. The item “Tile Backer Board Insulation Floor Panel XPS Cement Coated Fibre Mesh Top Qualit” is in sale since Monday, March 6, 2017. This item is in the category “Home, Furniture & DIY\Heating, Cooling & Air\Air Conditioners & Heaters\HVAC Parts & Accessories”. The seller is “cosyspace” and is located in Manchester, Greater Manchester. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Canada, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Ukraine, Chile.

  • Type: Underfloor Heating
  • MPN: Tile Backer Board
  • Brand: Cosy Space
  • Sub-Type: Cement Coated Insulation Board
  • Finish: Mesh & Cement Coat
Double Aluminium Single Bubble Foil Insulation Loft Caravan Home Wall Shed


Double Aluminium Single Bubble Foil Insulation Loft Caravan Home Wall Shed


Double Aluminium Single Bubble Foil Insulation Loft Caravan Home Wall Shed


Double Aluminium Single Bubble Foil Insulation Loft Caravan Home Wall Shed


Double Aluminium Single Bubble Foil Insulation Loft Caravan Home Wall Shed


Double Aluminium Single Bubble Foil Insulation Loft Caravan Home Wall Shed


Double Aluminium Single Bubble Foil Insulation Loft Caravan Home Wall Shed


Double Aluminium Single Bubble Foil Insulation Loft Caravan Home Wall Shed


Double Aluminium Single Bubble Foil Insulation Loft Caravan Home Wall Shed



Boost U-Values to 0.35 or better. Foil to one side with one layer of polyethylene bubble. Benefits 1BD/A-1 foil to one side with one layer of polyethylene bubble. U-Foil insulation creates a warm roof situation. The system combines two layers of U-Foil. The inner layer acts as not only an insulation but with the combination of U-Foil having a vapour resistance in excess of 500 MNsg-1. A vapour control layer is completed when the joints are taped. To install correctly the bottom layer is to be fixed in position using spacer clips thus creating a 25mm air gap between the two layers of U-Foil. Form a 50mmm lap and tape the joints using 75mm foil tape. The top layer to be pulled taught and fixed with 150mm weathered laps and secured in position with tiling battens. The outer layer combines the insulation purposes plus a tile underlay. To increase the thermal capacity within the structure you can increase the 25mm air gap between the two layers of U-Foil to 50mm and introduce a separating membrane such as single layer aluminium to create two airspaces rather than one, this then enables the layers of U-Foil to achieve the maximum thermal performance. Our Ufoil products increase the thermal capacity within the given application thus reducing the U-Value (thermal transmittance). Ufoil not only offers a higher thermal resistance with its vapour resistance in excess of 500MNsg-1 this would then be considered as a vapour control layer as defined in section 1 of BS2520:1989 (1995). Drylining Installation Guide & Example. Ufoil walls Drylining Drylining Installation Guide & ExampleThe depth of the timber battens and metal furrings should comply with BS 8212 : 1995. The depth of the timber battens or metal furrings will determine the air space achieved on either side of the product. 1 Battens tanalised in accordance with BS 5268-5: 1989 (1997) are fixed either vertically or horizontally at 400mm. Battens must always be placed at the top and bottom of the wall and around the perimeter of doors and windows. The product is applied directly from the roll either vertically or horizontally depending on the wall height, pulled tight and stapled onto the battens at minimum 300mm centres. The foil side of material should face the cavity. The product to be butt-jointed onto the battens and sealed using the recommended foil faced to tape, this then enables the product to become a vapour barrier. The plasterboard is fixed over the product and onto the battens in the usual manor. 2 Alternatively the product (foil face facing the cavity) can be retained directly against the wall by the battens at minimum 300mm centres. The plasterboard is placed on top of the battens. Following the above procedure as described above it is possible to fix counter battens in the usual manner. The foil sides of the material will be facing the cavities formed by the use of the battens. Traditional Installation Guide & Example. It is generally recommended that the inner leaf is to be constructed ahead of the outer leaf as this will ensure the laps are weathered to the outside. When constructing the cavity the leading leaf should be constructed to a height of approximately 1.2metre or 4 / 5 blocks above dpc level. The secondary leaf is built up to the top-most line of wall ties. Once the leading leaf has attained adequate strength, the initial run of 2BD/A or 1BD/A is positioned over the wall ties which should be installed in accordance with BS5628-3: 1985, the wall ties assessed in accordance with DD 140-1: 1986. The next run to be installed ensuring a minimum overlap of 75mm, this to be repeated at all horizontal joints. All vertical joints in the product should always be on line of the wall ties, ensuring a 100mm overlap i. 50mm either side of the wall tie, all vertical joints are to be tapped using are special foil tape. The tape should be between 30 and 40 microns. When arriving at door and window openings our U-Foil products can be brought through the closed reveal to act as an insulating dpc. Ufoil 1bd/a-1 has been specially adapted for Timber/Modular Frame structures and will significantly improve thermal insulation reducing the U-Value (thermal transmittance) of new structures. 1bd/a-1 Timber/Modular Frame application has been specially adapted to release moisture, which may build up between the sheathing board and polyethylene bubble. The polyethylene structure has been modified to allow any unexpected moisture to flow between the bubbles and disperse accordingly. 1bd/a-1 is applied horizontally ensuring minimum overlaps of 75mm up against the sheathing board and with the aluminium foil facing the cavity this then maximises the thermal performance of the product. We Offer 10 Years of secure online trading experience We welcomed over 500,000 satisfied customers last year Quality products at low prices Large stocks with an exceptional after sales service. Our mindset is eCommerce with that personal touch that some larger organisations cannot offer Its a large part of our business strategy. MULTIPLE ORDERS Dont worry if you pay for your items seperately, our system will combine your order into one and all your order will be delivered together. All sales include VAT at the current UK rate, except where the product is exempt from VAT. Order before 12pm & choose 24 hour courier at checkout. All our packages are tracked. AB 36-38 & 55-56, BT (all), FK 17-21, HS (all), IM (all), IV (all), KA 27-28, KW (all), PA 20-99, PH 15-99, ZE (all), Channel Islands. We believe that you will be delighted with your product but there may be occasions where you feel it necessary to return an item. We aim to keep the process as simple as possible and these terms do not affect your statutory rights. PLEASE Do not return Goods to us without following the procedure below. The reason we ask for your compliance is to ensure our dispatch facility which sends out thousands of parcels every week runs as efficiently as possible. This ensures lower costs to our consumers. This will identify your claim. B Please return all the original packaging where possible to do so;(damaged or un-opened). C The Goods must be packaged securely taking all measures where possible to prevent any damage in transit; 3. D Please mark your return on the outside with your order reference and send back to us at the address provided. Where Goods have been damaged in your possession we shall not be obliged to accept the return of those Goods. We will ask for your instruction. We will advise you in writing. When we accept any return of any Goods that are not faulty, we will not be obliged to cover any expenditure in returning the said goods back to our place of business. A reason for this decision will be provided. We are confident all products will meet your expectation and extend our guarantee to all our products. The item “Double Aluminium Single Bubble Foil Insulation Loft Caravan Home Wall Shed” is in sale since Wednesday, November 8, 2017. This item is in the category “Business, Office & Industrial\Building Materials & Supplies\Insulation”. The seller is “trade-mart-uk” and is located in DUNDEE. This item can be shipped worldwide.

  • Brand: Ufoil
  • Colour: Silver
  • Pack Size: 1
  • VAT Rate: 20
  • For: insulation
  • Purpose: Heat Retention
  • Item Subtype: foil insulation
  • Material: Aluminium
  • Most Suitable For: Insulating
  • Suitable For: insulating
  • Main Colour: silver
  • Featured Refinements: Foil Insulation
  • Finish: Bright Silver
10mm Closed Cell Foam Thermal Sound Deadening Insulation Adhesive Waterproof


10mm Closed Cell Foam Thermal Sound Deadening Insulation Adhesive Waterproof


10mm Closed Cell Foam Thermal Sound Deadening Insulation Adhesive Waterproof


10mm Closed Cell Foam Thermal Sound Deadening Insulation Adhesive Waterproof


10mm Closed Cell Foam Thermal Sound Deadening Insulation Adhesive Waterproof


10mm Closed Cell Foam Thermal Sound Deadening Insulation Adhesive Waterproof


10mm Closed Cell Foam Thermal Sound Deadening Insulation Adhesive Waterproof


10mm Closed Cell Foam Thermal Sound Deadening Insulation Adhesive Waterproof


10mm Closed Cell Foam Thermal Sound Deadening Insulation Adhesive Waterproof. BEWARE OF OTHER POOR QUALITY INFERIOR, UNTESTED, UNBRANDED PRODUCTS! HIGH QUALITY SELF ADHESIVE, CUT, PEEL & APPLY! DOES NOT ABSORB WATER! FLAME RETARDANT TO FMVSS302. HIGH PERFORMANCE (UP TO 20Db REDUCTION). USED BY LUXURY CAR MANUFACTURERS. This easy to install car sound deadening & insulation foam is ideal for a range of applications including. VEHICLE ROOFS, CEILING PANELS &HEADLINERS. SIDE PANELS, DOORS & INNER BULKHEADS. MAIN FLOOR, BOOT FLOOR & WHEEL ARCHES. Once fitted this product will improve. OVERALL VEHICLE REFINEMENT & SOUND QUALITY. PANEL RESONANCE & MINIMISE VIBRATION. THERMAL PERFORMANCE OF THE TREATED AREA. SQUEAK & RATTLE ISSUES. As Variation Selected (Max Size 1m x 10m). 40°C to +120°C (Tested). The item “10mm Closed Cell Foam Thermal Sound Deadening Insulation Adhesive Waterproof” is in sale since Tuesday, May 3, 2016. This item is in the category “Home, Furniture & DIY\Heating, Cooling & Air\Air Conditioners & Heaters\HVAC Parts & Accessories”. The seller is “car-insulation-uk” and is located in Nuneaton. This item can be shipped to United Kingdom, Ireland, Germany, France, Spain, Antigua and barbuda, Bulgaria, Croatia, Cyprus, Estonia, Greece, Hungary, Latvia, Lithuania, Luxembourg, Malta, Romania, Slovakia, Slovenia, Australia, United States, Canada, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Ukraine, Chile.

  • Type: Insulation
  • Colour: Black
  • Modified Item: No
  • Custom Bundle: No
  • Material: Closed Cell Foam
  • MPN: CIUK 10mm CCF
  • Brand: Car Insulation UK
  • Non-Domestic Product: No