Just another WordPress weblog

20x20 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange


20x20 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange


20×20 Water to Air Heat Exchanger1 Copper Ports w/ EZ Install Front Flange. 20×20 / 160,000 BTUs / 180 PSI. For use in your hot air furnace plenum. Not recommended for air compressors. Information about our heat exchangers. This heat exchanger is ideal for a 20″x 21″ plenum or larger. The outlets come out on the 20 side (shown as the vertical side in the picture above). The fin area is 20″x 20″. There is a 1 frame on the end opposite the outlets that covers the copper elbows. This makes the area inside of your plenum 1 longer. All exchangers are 3 1/2 thick. Outside Dimensions 20(width)x23.5(Length from Manifold to Base)x3.5(Thickness). Aluminum fins are installed at 12 fines per inch. All exchangers are triple pass design. Tubing is 1/4 copper. All our exchangers include the flat front face mounting for easier installation and increased plenum strength. Our exchangers have 1 copper outlets and can be installed with either sweat fittings or push fit type fittings like sharkbite’s. Exchangers will work with chilled water also. We stock many sizes, always order the largest size that will fit into your plenum. Installation brackets for installing water to air heat exchangers inside of furnace plenums. This easy to install kit takes all of the work out of installing a coil. Great for the do it yourselfer or the seasoned installer. Even most that are listed as 4″ are actually 3.5″. As a stand alone heat source by simply attaching a fan or squirrel cage to one side of the unit. They can be installed in either the hot air side or the cold air return of a furnace. Please note that if installed in the cold air return you will need to install a 3 way zone valve in order for the fan to operate properly. This heat exchanger is of a new style which does not require bending of your duct work. This new style heat exchanger can be easily installed by just slipping it into the plenum and attaching with self threading screws. You will not need any special tools to install. This unit is easier to install than others on the market because it attaches from the front instead of the side. Water to Air heat exchangers, often called duct coils or furnace radiators, are uséd for installing into forced air furnace to provide heat from hot water. They work in much the same way as the central air conditioning unit. The following things should be taken into consideration when installing a duct coil. (1) Size the coil so that the fins take up the maximum amount of the plenum as possible. (2) Securely fasten the unit so that it doesn’t rattle. (3) Make sure there are no foreign objects are touching the fins or the tubes. (4) Duct tape any air leaks. (5) Do not bend the fins. If you do, straighten them as best you can. A tool called a “Rake” is available for straightening the fins. (6) If you are going to run your outside heat in the summer install a bypass valve. (7) A duct coil installation kit makes installing the heat exchanger easier. 24×24 w/1 1/4 ports. 30×30 w/1 1/4 ports. 36×36 w/1 1/4 ports. The item “20×20 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange” is in sale since Thursday, June 20, 2019. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\Furnaces & Central Heating Systems”. The seller is “badger-pipe” and is located in Mauston, Wisconsin. This item can be shipped worldwide.

  • Brand: Undisclosed
  • MPN: Does not apply
  • UPC: 689807252500
4 TON RHEEM AIR HANDLER With COPPER EVAP COIL NEW R-410A


4 TON RHEEM AIR HANDLER With COPPER EVAP COIL NEW R-410A


4 TON RHEEM AIR HANDLER With COPPER EVAP COIL NEW R-410A


4 TON RHEEM AIR HANDLER With COPPER EVAP COIL NEW R-410A


4 TON RHEEM AIR HANDLER With COPPER EVAP COIL NEW R-410A


4 TON RHEEM AIR HANDLER With COPPER EVAP COIL NEW R-410A


4 TON RHEEM AIR HANDLER With COPPER EVAP COIL NEW R-410A


4 TON “RHEEM” AIR HANDLER (R-410A) “NEW”. FIRST AND FOREMOST; I Thank All Of You For Taking. Interest In Looking At My Items! I encourage all questions to be asked before committing yourself to the listing; this will ensure all buyers know whatever. Additional Information they think is necessary to make a good decision on purchasing the item up for sale. PLEASE READ COMPLETELY THE ITEM DESCRIPTION! What is being offered and will eliminate buyers trying to return merchandise by stating that the item is not as described in the listing. Every item listed is exactly described with actual pictures of the exact item, model #s, specifics, condition, etc. 4 TON “RHEEM” AIR HANDLER UNIT WITH COPPER EVAPORATOR COIL (NEW) MDL#. THE MULTI-POSITION AIR HANDLER UNIT FEATURES A ECM BLOWER MOTOR, A TXV (THERMAL EXPANSION VALVE) METERING DEVICE, AND A COPPER EVAPORATOR COIL. THE AIR HANDLER MEASURES 21W X 22D X 52H. “THE UNIT IS IN “NEW” CONDITION AND HAS NEVER BEEN USED OR INSTALLED”. FOR ADDITIONAL INFORMATION, SPECIFICATIONS, PICTURES, OR OTHER TYPE OF RESIDENTIAL HVAC EQUIPMENT, PLEASE CONTACT. I CANNOT GUARANTEE THE MANUFACTURE WILL HONOR WARRANTIES ON SURPLUS OR NOS (NEW OLD STOCK) EQUIPMENT. ALL HVAC UNITS AND/OR DISMANTLED COMPONENT PARTS ARE TO BE INSTALLED BY A EPA CERTIFIED HVAC PERSON OR COMPANY IN ACCORDANCE TO YOUR LOCAL CODE REQUIREMENTS. I the “customer” acknowledge that I have read and accept the foregoing terms. All items are in stock at the time the item was listed. Remember, most listed items are for sale locally also. All third party transportation companies usually (under normal circumstances) deliver the merchandise within 3 to 7 days (transit time). For your convenience I accept. Normally operate and can deliver the merchandise without problems. Third party transportation companies/service providers. LOCAL P/U IS FREE AND CAN BE ARRANGED ALONG WITH A DISCOUNT IN THE TOTAL PRICE. All brands are registered trademarks of their respective holders. Air and Heat Equipment, LLC. I often will have for sale pre-owned equipment also. For this reason some of the equipment does not come in the original packaging/manufacturers box. This is reflected in the price I pay and the savings are always passed on to you the customer! PLEASE READ ENTIRELY THE. INFORMATION AND KNOWN DETAILS PERTAINING TO THE EQUIPMENT FOR SALE. All merchandise condition will be described and represented to the best of my ability, and have pictures when possible. Communication is everything, and usually resolves most ordinary misunderstandings between buyers and sellers. My goal is to achieve your satisfaction. Most of my new items might carry limited warranties through the manufacturers, not me. I do guarantee all items I sell with regards to being defective. I would need to know all the facts regarding the sale to determine if I have any fault that might have caused the problem and then decide what action is best. All decisions would be at my discretion. The item “4 TON RHEEM AIR HANDLER With COPPER EVAP COIL NEW R-410A” is in sale since Thursday, August 30, 2018. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\Central Air Conditioners”. The seller is “air-n-heat” and is located in Miami, Florida. This item can be shipped to United States.

  • Energy Star: Compliant
  • Brand: RHEEM
  • Model: RHLL-HM4821JA
100 Feet 1/4-3/8 Insulated 100% Copper line set


100 Feet 1/4-3/8 Insulated 100% Copper line set


100 Feet 1/4-3/8 Insulated 100% Copper line set


100 Feet 1/4-3/8 Insulated 100% Copper line set


100 Feet 1/4-3/8 Insulated 100% Copper line set


100 Feet 1/4-3/8 Insulated 100% Copper line set


This is an AMAZING product! C1220 copper grade 99.9% Copper bends amazingly smooth won’t kink. The insulation is from high performance Polyethylene material, tear resistant Jacket around the insulation. The item “100 Feet 1/4-3/8 Insulated 100% Copper line set” is in sale since Tuesday, August 21, 2018. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\Central Air Conditioners”. The seller is “jolebo-0″ and is located in Brooklyn, New York. This item can be shipped to United States.

  • Features: Ductless
  • MPN: Does Not Apply
  • Brand: Jaingyin
  • Type: Split System
20x20 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange


20x20 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange


20x20 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange


20x20 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange


20x20 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange


20×20 / 160,000 BTUs / 180 PSI. For use in your hot air furnace plenum. Not recommended for air compressors. Information about our heat exchangers. This heat exchanger is ideal for a 20″x 21″ plenum or larger. The outlets come out on the 20 side (shown as the vertical side in the picture above). The fin area is 20″x 20″. There is a 1 frame on the end opposite the outlets that covers the copper elbows. This makes the area inside of your plenum 1 longer. All exchangers are 3 1/2 thick. Outside Dimensions 20(width)x23.5(Length from Manifold to Base)x3.5(Thickness). Aluminum fins are installed at 12 fines per inch. All exchangers are triple pass design. Tubing is 1/4 copper. All our exchangers include the flat front face mounting for easier installation and increased plenum strength. Our exchangers have 1 copper outlets and can be installed with either sweat fittings or push fit type fittings like sharkbite’s. Exchangers will work with chilled water also. We stock many sizes, always order the largest size that will fit into your plenum. Installation brackets for installing water to air heat exchangers inside of furnace plenums. This easy to install kit takes all of the work out of installing a coil. Great for the do it yourselfer or the seasoned installer. Even most that are listed as 4″ are actually 3.5″. These heat exchangers are to be hooked up to a boiler or a chilled water source. When hooked up to your boiler or chilled water source, these heat exchangers can also be used as a stand alone heat source by simply attaching a fan or squirrel cage to one side of the unit. They can be installed in either the hot air side or the cold air return of a furnace. Please note that if installed in the cold air return you will need to install a 3 way zone valve in order for the fan to operate properly. This heat exchanger is of a new style which does not require bending of your duct work. This new style heat exchanger can be easily installed by just slipping it into the plenum and attaching with self threading screws. You will not need any special tools to install. This unit is easier to install than others on the market because it attaches from the front instead of the side. Water to Air heat exchangers, often called duct coils or furnace radiators, are used for installing into forced air furnace to provide heat from hot water. They work in much the same way as the central air conditioning unit. The following things should be taken into consideration when installing a duct coil. (1) Size the coil so that the fins take up the maximum amount of the plenum as possible. (2) Securely fasten the unit so that it doesn’t rattle. (3) Make sure there are no foreign objects are touching the fins or the tubes. (4) Duct tape any air leaks. (5) Do not bend the fins. If you do, straighten them as best you can. A tool called a “Rake” is available for straightening the fins. (6) If you are going to run your outside heat in the summer install a bypass valve. (7) A duct coil installation kit makes installing the heat exchanger easier. 24×24 w/1 1/4 ports. 30×30 w/1 1/4 ports. 36×36 w/1 1/4 ports. The item “20×20 Water to Air Heat Exchanger1 Copper Ports with EZ Install Front Flange” is in sale since Tuesday, June 12, 2018. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\Furnaces & Central Heating Systems”. The seller is “badger-pipe” and is located in Mauston, Wisconsin. This item can be shipped worldwide.

  • Brand: Badgerpipe
  • Model: 20×20
  • Type: Heat Exchanger
  • MPN: 20×20
NEW! Stunning Designer Copper Heated Towel Ladder Rails Radiators (11 Sizes)


NEW! Stunning Designer Copper Heated Towel Ladder Rails Radiators (11 Sizes)


NEW! Stunning Designer Copper Heated Towel Ladder Rails Radiators (11 Sizes)


NEW! Stunning Designer Copper Heated Towel Ladder Rails Radiators (11 Sizes)


NEW! Stunning Designer Copper Heated Towel Ladder Rails Radiators (11 Sizes)


NEW! Stunning Designer Copper Heated Towel Ladder Rails Radiators (11 Sizes)


NEW! Stunning Designer Copper Heated Towel Ladder Rails Radiators (11 Sizes)


Stunning Designer “Copper” Heated Towel Ladder Rails Radiators (11 Sizes). Vertical Coloured Radiators (Other). Vertical Flat Panel Radiators. Horizontal Coloured Radiators (Other). Horizontal Flat Panel Radiators. Central Heating Towel Rails. Straight Chrome Ladder Rails. Curved Chrome Ladder Rails. Straight White Ladder Rails. Stainless Steel Ladder Rails. Chrome Designer Towel Rails. Anthracite Designer Towel Rails. White Designer Towel Rails. Black Designer Towel Rails. Coloured Towel Rails (Other). Designer Aluminium Towel Rails. Electric Towel Rails (Rail + Element). Electric Pre-filled Towel Rails. Electric Controllers & Timers. Wastes & Bottle Traps. Whirlpool / Airpool Baths. Bath Wastes & Plugs. Wet Room Shower Drains. Deck Mounted Shower Valves. Seats & Grab Rails. Tall Vanity Basin Taps. Free Standing Bath Taps. Bidet Taps & Douche Kits. Waste & Bottle Traps. Shower Seats & Grab Rails. Projection from Wall (mm). 90mm to 110mm (adjustable brackets). 800mm, 1200mm or 1600mm. 300mm, 400mm, 500mm or 600mm. Includes Fixing Kit, Wall Brackets, Bleed Valve & Blank Plug. Heated towel rail is a functional heating solution for a variety of roomsets and installations. The stunning copper finish is a true design statement! We have a wide range of sizes varying in width. Mm up to 6. Mm Our towel rails are ideal for both: – drying towels or clothing. Providing an efficient heat source to the room. All of our copper ladder rails are manufactured and packaged to the highest standard. Mm horizontal tubing for improved heat outputs and aesthetics and are more appealing than the standard, smaller 19mm tube often used. The sparkling copper finish is lacquered for a robust outer finish. Straight Copper Ladder Heated Towel Rails. Projection from Wall: 90mm – 110mm (Adjustable Brackets) Pipe Centres: Width of Towel Rail minus 45mm (BTUS / WATTS Listed below). 300mm(w) x 800mm(h) Straight Copper – (895 / 262) 300mm(w) x 1200mm(h) Straight Copper – (1326 / 388) 400mm(w) x 800mm(h) Straight Copper – (1107 / 324) 400mm(w) x 1200mm(h) Straight Copper – (1637 / 479) 400mm(w) x 1600mm(h) Straight Copper – (2344 / 687). 500mm(w) x 800mm(h) Straight Copper – (1402 / 411) 500mm(w) x 1200mm(h) Straight Copper – (2084 / 611) 500mm(w) x 1600mm(h) Straight Copper – (2761 / 809). 600mm(w) x 800mm(h) Straight Copper – (1624 / 476) 600mm(w) x 1200mm(h) Straight Copper – (2330 / 683) 600mm(w) x 1600mm(h) Straight Copper – (2945 / 863). 900mm(w) x 600mm(h) Straight Copper – (1744 / 512). All of our ladder rails are supplied with. 4 Point fixing copper kit – x1 Bleed Valve – x1 Blank Plug – Our 10 year manufacture guarantee. Our range of heated towel rails can be installed in 3 different ways. On your central heating system. You will need a suitable pair or valves. We recommend using a pair of Angled or Corner Valves When you pipework is coming from the wall or a pair of straight valves when you pipework is coming up from the floor. Please see: NWT Valve Multilisting. As a stand alone electric towel rail. You will need: – a suitable electric heating element either standard fixed temperature or manually controlled thermostatic. X1 additional blank plug. The towel rail to be pre-filled. Please see: NWT Electric Heating Element Multilisting. As a dual fuel towel rail. You will need: – a suitable dual fuel valve kit (includes valve kit and electric element – pipework coming from the wall) Please see: NWT Dual Fuel Valve Kits. Scottish Highlands and Islands (Postcodes: AB, DD, FK, IV, KW, PA, PH). We are more than happy to deliver internationally. The item “NEW! Stunning Designer Copper Heated Towel Ladder Rails Radiators (11 Sizes)” is in sale since Tuesday, August 29, 2017. This item is in the category “Home, Furniture & DIY\Heating, Cooling & Air\Air Conditioners & Heaters\Radiators”. The seller is “nwt-direct” and is located in Conwy. This item can be shipped to North, South, or Latin America, European Union member countries, Japan, Australia.

  • Width: 300mm, 400mm, 500mm or 600mm
  • Height: 800mm, 1200mm or 1600mm
  • Type: Copper Towel Rails
  • Sub-Type: Designer Copper Heated Ladder Rails
  • Brand: NWT Direct
  • Finish: Copper (Lacquered Outer)
  • Depth: 90mm to 110mm Adjustable Brackets
  • EAN: Does Not Apply
16x18 Water to Air Heat Exchanger 1 Copper Ports with EZ Install Front Flange


16x18 Water to Air Heat Exchanger 1 Copper Ports with EZ Install Front Flange


16x18 Water to Air Heat Exchanger 1 Copper Ports with EZ Install Front Flange


16x18 Water to Air Heat Exchanger 1 Copper Ports with EZ Install Front Flange


16x18 Water to Air Heat Exchanger 1 Copper Ports with EZ Install Front Flange


16×18 / 115,200 BTUs / 100 PSI For use in your hot air furnace plenum. Please see charts in above pics. Not recommended for air compressors. This listing does not include the install kit. Information about our heat exchangers. This heat exchanger is ideal for a 16″x 19″ plenum or larger. The outlets come out on the 16 side (shown as the vertical side in the picture above). The fin area is 16″x 18″. Outside Dimensions 16(width)x21.5(Length from Manifold to Base)x3.5(Thickness). There is a 1 frame on the end opposite the outlets that covers the copper elbows. This makes the area inside of your plenum 1 longer. All exchangers are 3 1/2 thick. Aluminum fins are installed at 12 fines per inch. All exchangers are triple pass design. Tubing is 1/4 copper. All our exchangers include the flat front face mounting for easier installation and increased plenum strength. Our exchangers have 1 copper outlets and can be installed with either sweat fittings or push fit type fittings like sharkbite’s. Exchangers will work with chilled water also. We stock many sizes, always order the largest size that will fit into your plenum. Installation brackets for installing water to air heat exchangers inside of furnace plenums. This easy to install kit takes all of the work out of installing a coil. Great for the do it yourselfer or the seasoned installer. Even most that are listed as 4″ are actually 3.5″. These heat exchangers can also be used as a stand alone heat source by simply attaching a fan or squirrel cage to one side of the unit. They can be installed in either the hot air side or the cold air return of a furnace. Please note that if installed in the cold air return you will need to install a 3 way zone valve in order for the fan to operate properly. This heat exchanger is of a new style which does not require bending of your duct work. This new style heat exchanger can be easily installed by just slipping it into the plenum and attaching with self threading screws. You will not need any special tools to install. This unit is easier to install than others on the market because it attaches from the front instead of the side. Check our other listings for an installation kit that makes it super easy to do the entire installation. Water to Air heat exchangers, often called duct coils or furnace radiators, are used for installing into forced air furnace to provide heat from hot water. They can be installed into the cold air side of the furnace if that is the best option. They work in much the same way as the central air conditioning unit. The following things should be taken into consideration when installing a duct coil. (1) Size the coil so that the fins take up the maximum amount of the plenum as possible. (2) Securely fasten the unit so that it doesn’t rattle. (3) Make sure there are no foreign objects are touching the fins or the tubes. (4) Duct tape any air leaks. (5) Do not bend the fins. If you do, straighten them as best you can. A tool called a “Rake” is available for straightening the fins. (6) If you are going to run your outside heat in the summer install a bypass valve. (7) A duct coil installation kit makes installing the heat exchanger easier. The item “16×18 Water to Air Heat Exchanger 1 Copper Ports with EZ Install Front Flange” is in sale since Wednesday, February 4, 2015. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\Furnaces & Central Heating Systems”. The seller is “badger-pipe” and is located in Mauston, Wisconsin. This item can be shipped worldwide.

  • Type: Heat Exchanger
  • MPN: 16×18
  • Brand: Badgerpipe
  • Model: 16×18
18x18 Water to Air Heat Exchanger 1 Copper Ports with EZ Install Front Flange


18x18 Water to Air Heat Exchanger 1 Copper Ports with EZ Install Front Flange


18x18 Water to Air Heat Exchanger 1 Copper Ports with EZ Install Front Flange


18x18 Water to Air Heat Exchanger 1 Copper Ports with EZ Install Front Flange


18x18 Water to Air Heat Exchanger 1 Copper Ports with EZ Install Front Flange


18×18 / 129,600 BTUs / 100 PSI For use in your hot air furnace plenum. Please see charts in the pics above. Not recommended for air compressors. This listing does not include the install kit. Information about our heat exchangers. This heat exchanger is ideal for a 18″x 19″ plenum or larger. The outlets come out on the 18 side (shown as the vertical side in the picture above). The fin area is 18″x 18″. Outside Dimensions 18(width)x21.5(Length from Manifold to Base)x3.5(Thickness). There is a 1 frame on the end opposite the outlets that covers the copper elbows. This makes the area inside of your plenum 1 longer. All exchangers are 3 1/2 thick. Aluminum fins are installed at 12 fines per inch. All exchangers are triple pass design. Tubing is 1/4 copper. All our exchangers include the flat front face mounting for easier installation and increased plenum strength. Our exchangers have 1 copper outlets and can be installed with either sweat fittings or push fit type fittings like sharkbite’s. Exchangers will work with chilled water also. We stock many sizes, always order the largest size that will fit into your plenum. Installation brackets for installing water to air heat exchangers inside of furnace plenums. This easy to install kit takes all of the work out of installing a coil. Great for the do it yourselfer or the seasoned installer. Even most that are listed as 4″ are actually 3.5″. These heat exchangers can also be used as a stand alone heat source by simply attaching a fan or squirrel cage to one side of the unit. They can be installed in either the hot air side or the cold air return of a furnace. Please note that if installed in the cold air return you will need to install a 3 way zone valve in order for the fan to operate properly. This heat exchanger is of a new style which does not require bending of your duct work. This new style heat exchanger can be easily installed by just slipping it into the plenum and attaching with self threading screws. You will not need any special tools to install. This unit is easier to install than others on the market because it attaches from the front instead of the side. Check our other listings for an installation kit that makes it super easy to do the entire installation. Water to Air heat exchangers, often called duct coils or furnace radiators, are used for installing into forced air furnace to provide heat from hot water. They can be installed into the cold air side of the furnace if that is the best option. They work in much the same way as the central air conditioning unit. The following things should be taken into consideration when installing a duct coil. (1) Size the coil so that the fins take up the maximum amount of the plenum as possible. (2) Securely fasten the unit so that it doesn’t rattle. (3) Make sure there are no foreign objects are touching the fins or the tubes. (4) Duct tape any air leaks. (5) Do not bend the fins. If you do, straighten them as best you can. A tool called a “Rake” is available for straightening the fins. (6) If you are going to run your outside heat in the summer install a bypass valve. (7) A duct coil installation kit makes installing the heat exchanger easier. The item “18×18 Water to Air Heat Exchanger 1 Copper Ports with EZ Install Front Flange” is in sale since Thursday, February 5, 2015. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\Furnaces & Central Heating Systems”. The seller is “badger-pipe” and is located in Mauston, Wisconsin. This item can be shipped worldwide.

  • Type: Heat Exchanger
  • MPN: 18×18
  • Brand: Badgerpipe
  • Model: 18×18
2018 Trusted COMFORT 1000 EdenPURE Infrared Heater Solid Copper PTC and Remote


New 2018 EdenPURE Trusted COMFORT 1000. The next generation of portable infrared heaters incorporating the best features of the EdenPURE line. The Trusted COMFORT 1000 is a portable zone heater with a Solid Copper PTC heating element at its core and a new quiet high output fan motor. The Positive Temperature Coefficient or PTC heating elements are designed for years of durable use. This heating source is designed to be a reliable, durable and efficient means of heat production. The Trusted COMFORT sets itself apart from other portable heaters with over 4.5 square feet of copper surface area. This, combined with the durable PTC heating element efficiently provides penetrating heat that will not dry out humidity or reduce oxygen. The EdenPURE Trusted COMFORT is a safe heater because none of the exposed surfaces get hot to the touch. Now inherent in all Solid Copper EdenPURE PTC heating elements is the smart functioning of the unit to monitor and gauge heat output whereby the PTC element never gets hotter than the set temperature. It is a safety feature that EdenPURE is proud to bring to their line of efficient heaters. The Trusted COMFORT is also equipped with a dual high limit sensor to ensure additional heater safety. This classic cabinet design has 24 heat settings that enable it to satisfy virtually any comfort level. The analog heat settings cover only a 2 degree temperature spread making them more accurate and less problematic than our older digital thermostats. The easy-to-use controls also feature High and Low operating modes, to give it additional flexibility of heat output and a convenient remote control. In an industry first, this years model is also equipped with a step up power start. Each time the heater begins a heating cycle, it monitors and slowly increases it’s power output up to full. This limits voltage spikes in your home, tripped breakers and is overall easier on your electric. The EdenPURE Trusted Comfort also has a new built it Auto-Reboot Feature. This allows the unit to restart itself after a power interruption. Heats up to 1000 Sq Ft. Solid Copper PTC (Positive Thermal Coefficient) Heating Core. Remote control is included which allows you to adjust the temperature, mode and power from across the room. Included washable lifetime filter. Safe around children or pets. Heats room evenly, wall to wall and floor to ceiling. Has no exposed heating elements that can cause a fire. Overheat protection sensor will shut off heater if it reaches an excessive heat level. Solid Copper PTC Heating Element. 80,000+ Hour Life-Expectancy. Recommended for Small to Large Rooms. Temperature Controls (24 preset). Temperature Range: 40°F to 90°F. Lifetime Washable Filter (included). Dual High Limit Sensor. Touch-Safe Front Grill Cover. 18.25″W x 16″H x 18.75D. 1,500 Watts High/ 1,000 Watts Low. 12.5 Amps (On High). Rated at 5000 BTU. The item “2018 Trusted COMFORT 1000 EdenPURE Infrared Heater Solid Copper PTC and Remote” is in sale since Tuesday, November 29, 2016. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\Space Heaters”. The seller is “pureenergystore” and is located in Garrettsville, Ohio. This item can be shipped to United States.

  • Power Source: Electric
  • Color: Black
  • MPN: A5551B
  • Brand: EdenPURE
  • Type: Infrared
  • Features: Portable
Mini Split Line Set Extension 25FT 1/4'' and 3/8 Flared Insulated Copper


25′ Line Set Extension for Ductless Air Conditioners (1/4” / 3/8”). Insulated High Quality Copper Tubing. 1/4″ and 3/8″ Inch Flared Fittings. Total Length: 25 Ft. The item “Mini Split Line Set Extension 25FT 1/4” and 3/8 Flared Insulated Copper” is in sale since Monday, January 9, 2017. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\Central Air Conditioners”. The seller is “sogoodtobuy” and is located in DORVAL. This item can be shipped to United States, Canada.

  • Type: Split System
  • MPN: PJX-02
  • Brand: Senville