Just another WordPress weblog

Mr. Heater Big Buddy Heater 4,000, 9,000 and 18,000 BTU/Hr. (Standard)


Mr. Heater Big Buddy Heater 4,000, 9,000 and 18,000 BTU/Hr. (Standard)


Mr. Heater Big Buddy Heater 4,000, 9,000 and 18,000 BTU/Hr. (Standard)


Mr. Heater Big Buddy Heater 4,000, 9,000 and 18,000 BTU/Hr. (Standard)


Mr. Heater Big Buddy Heater 4,000, 9,000 and 18,000 BTU/Hr. (Standard)


Heater Portable Big Buddy Propane Heater. Brand New in Original Packaging. 4,000, 9,000 or 18,000 BTUs Per Hour. Heats Up to 450 Square Feet. Single Control Start Knob. Accidental Tip-Over Safety Shut-Off. Automatic low oxygen shut-off system (ODS). Stay warm and toasty wherever you go with the Mr. Heater Big Buddy Portable Heater! Designed for convenience and performance, the Big Buddy Portable Buddy is indoor safe and heats spaces ranging from your homes garage to a large camping tent. 4,000, 9,000 or 18,000 BTU Output. Utilizing propane gas and featuring an impressive 4,000, 9,000 or 18,000 BTUs of heat output, the Big Buddy Portable Heater is capable of heating up to 450 square feet of enclosed space. An integrated fan further increases its heating capacity, merging radiant and convection style heat. Effortless Use and Maximum Performance. In addition to its impressive technical capacity, the Big Buddy Portable Heater features a variety of elements that enable effortless use and maximum performance. With its easy-start four-position control, fold-down handle, swivel-out fuel connection and a large overall heating surface, this unit raises the bar when it comes to portability and distinction in heating. The Big Buddy Portable Heater is built for safety and features an Oxygen Depletion Sensor (ODS) and tip-over detection system which accounts for low oxygen or accidental falls and automatically turns off the unit, ensuring safe and easy use for a long time to come! Wherever your travels take you, wherever youre going on your journey, bring the Mr. Heater Propane Portable Buddy Heater with so you can stay warm and comfortable! What’s in the Box. BTU: 4,000 or 9,000 or 18,000 BTUs Per Hour. Heat Source: Propane Gas. Range: Heats Up to 400 Square Feet. Control: Single Control Start Knob. Safety: Oxygen Depletion Sensor. Safety: Accidental Tip-Over Safety Shut-Off. F There are product categories which are not returnable due to hygienic or sanitary as required by manufacturers. In an event where there is an error regarding a price error or description, we will notify you ASAP. Items removed from their’blister-pack’ display packaging are non-refundable. The item “Mr. Heater Big Buddy Heater 4,000, 9,000 and 18,000 BTU/Hr. (Standard)” is in sale since Monday, August 13, 2018. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\Space Heaters”. The seller is “asavings” and is located in Brooklyn, New York. This item can be shipped to United States, Canada, United Kingdom, China, Mexico, Germany, Japan, Brazil, France, Australia, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Viet nam.

  • Brand: Mr. Heater
  • MPN: F274800
  • Features: Carrying Handle
  • Width: 17 Inch
  • Height: 17.5 Inch
  • Depth: 10 Inch
  • Number of Heat Settings: 3
  • Power Source: Propane
FORCED-AIR THREE CORN WOOD PELLET MULTIFUEL FURNACE STOVE, 120,000 BTU/Hr


FORCED-AIR THREE CORN WOOD PELLET MULTIFUEL FURNACE STOVE, 120,000 BTU/Hr


FORCED-AIR THREE CORN WOOD PELLET MULTIFUEL FURNACE STOVE, 120,000 BTU/Hr


FORCED-AIR THREE CORN WOOD PELLET MULTIFUEL FURNACE STOVE, 120,000 BTU/Hr


FORCED-AIR THREE CORN WOOD PELLET MULTIFUEL FURNACE STOVE, 120,000 BTU/Hr


FORCED-AIR THREE CORN WOOD PELLET MULTIFUEL FURNACE STOVE, 120,000 BTU/Hr


FORCED-AIR THREE CORN WOOD PELLET MULTIFUEL FURNACE STOVE, 120,000 BTU/Hr


FORCED-AIR THREE CORN WOOD PELLET MULTIFUEL FURNACE STOVE, 120,000 BTU/Hr


FORCED-AIR THREE CORN WOOD PELLET MULTIFUEL FURNACE STOVE, 120,000 BTU/Hr


FORCED-AIR THREE CORN WOOD PELLET MULTIFUEL FURNACE STOVE, 120,000 BTU/Hr


FORCED-AIR THREE CORN WOOD PELLET MULTIFUEL FURNACE STOVE, 120,000 BTU/Hr


THE FORCED-AIR DUCTOR MODEL III (THREE) 120,000 BTU/Hr, Heats up to 4500 Sq Ft Much HIGHER QUALITY than MODEL II, pay more get more MULTI-FUEL FURNACE that will CONNECT to DUCTWORK CORN & WOOD PELLET MULTIFUEL FURNACE (STOVE) AVAILBLE in THREE MODELS: I, II, and III. WORRIED ABOUT CORN PRICES RISING… ADD-ON FURNACE will reduce your dependance on more Expensive Fuel. Introducing the NEW MULTI-FUEL Model III (THREE), the Forced-Air Ductor, a multi-fueled furnace (stove) that will hookup to your existing forced air ductwork either as a Primary (Stand Alone) or a Secondary (Add-On). It is availble in three (3) Models. Model III has much higher quality construction with a variable speed 1650 CFM Room-Air Blower 1/2 Amp. Model I is 80,000 BTU/Hr. This multi-fueled Furnace will produce up to 120,000 BTU/Hr (Model III) and will burn corn, wood pellets, soybeans, sunflower seeds, wheat, cherry pits, olive pits, engineered pellets, and any biomass fuel. We suggest you experiment around. If corn prices skyrocket, then dump the corn for a lower cost fuel. This Multi-fueled Furnace will fit any size of home, garage, farm house, business at 2,000 sq. To 4,500 sq. Connect it with your DUCTWORK and run the room air STRAIGHT UP into your existing ductwork. All you need are a Duct Plenum Take-Off 22″ W x 22″ D and a matching Back-Draft damper. A Cold Return Air filter bracket 15″H x 20″L is built into the cold-air return air module (16-1/8″W x 21-5/16″D rectangular) at rear side bottom. The Cold-air will mount to either side. And you get more… There has to be more than 12 hours left in the listing. MODEL III (THREE) better than MODEL II (TWO). Model III is better than Model II (Two) and here are the reasons why. Bigger Room-Air blower 1650 CFM, three speed, 1/2 AMP. 15,000 BTU/Hr more heat. Fire Pot Bigger better more heat. Fire Pot Heavier Stainless Steel contruction, lasts longer. Hot-water Coil Capability, available as Option. Electric Grid Heat Backup, available as Option. Heavier Gage Steel, better built. Both Models I and II look similar. FORCED-AIR MULTIFUEL FURNACE, MODEL III (THREE) in a closeup view. FORCED-AIR MULTIFUEL FURNACE, MODEL III (THREE) in a long distance view. FORCED-AIR MULTIFUEL FURNACE, MODEL III (THREE) in an installation. FORCED-AIR MULTIFUEL FURNACE, MODEL III (THREE) in a pictorial sketch. Hopper and Auger at bottom of bin. 16 x 20 filter. Back-Draft DAMPER fits 22″ x 22″ Plenum for this Multifuel Furnace. LEAVES used as Back-Draft DAMPER in old existing Furnace. Flue Exhaust Pipe mounted outside in installation. Sketch Drawing of Example as PRIMARY STANDALONE FURNACE. Sketch Drawing of Example it as a SECOND FURNACE installed in PARALLEL. Worried about RISING fuel prices? … Well don’t worry. Or switch grass, or any BIO-MASS fuel of-the-future. The latest prices are posted in bags of sizes 40lb, 50lb, or 55lb where a bushel of corn is 55lb bag. BLUE SEAL STOVE CORN is in 40lb bags. Whole corn at a farm feed dealer is usually bagged in 50 bags. Only elevator grain (corn) is bagged in 55lb bushel bags. WOOD PELLETS come in a smaller bag (40 lb), and they burn less-hot than corn or other bio-mass material. CORN in EASTERN OHIO…………………………. Blue Seal STOVE CORN in NH……………………. Blue Seal STOVE CORN in VERMONT………. Blue Seal STOVE CORN in MAINE…………….. Blue Seal STOVE CORN in MASS……………….. Blue Seal STOVE CORN in NEW YORK……… Blue Seal STOVE CORN in PENN……………….. WOOD PELLETS in IOWA………………………. WOOD PELLETS in NEBRASKA…………………. WOOD PELLETS in OHIO…….. WOOD PELLETS NEW YORK…………………… WOOD PELLETS in PENN……………………….. WOOD PELLETS in MAINE…………………. WOOD PELLETS NEW HAMPSHIRE………… WOOD PELLETS IN MASS………………… BIG RED WHEAT NEBRASKA………………… BIG RED WHEAT MONTANA………………. BIG RED WHEAT CANADA……………….. Heat Output of Model III is 110,000 BTU/Hr. With heating speed adjustment from 50,000 to 110,000 BTU heating 2000 to 4,500 Square Feet will enable it to be speed-adjusted to fit the installation space. Model III has a very large Blower Motor (1/2 Amp) with variable speeds up to 1650 CFM. Model I heating output is 80,000 BTU/Hr. And will heat up to 3500 Square Feet. Note a Model IV at 165,000 BTU/Hr will heat up to 6500 Square Feet. Model I has a 210 lb Hopper Bin and Model II has 320 lbs, and Model III has a 250 lb Hopper Bin. They burn Corn, Woods Pellets, Cherry Pits, Olive Pits, Soy Beans, Processed Silage, Bio-Mass, Etc. Room Air on Model I is 1250 CFM, Model II is 1600 CFM, Model III is 1650 CFM (1/2 Amp variable speeds). The Cold-Air Return take-off module can be mounted on either side of the furnace and it has a slot for a 16″x20″ Filter. There are Options (see below) available such as (1) Heating Electric Element of 15 to 20 kWatts mounted in front of the Cold-Air Return, (2) Hot-water Coils to heat domestic hot water. Multifuel Pellet Furnace only: The Thermostat must be installed on an inside wall and located where it is not likely to be affected by the draft coming from an air outlet. It should be set at least 5 Degrees Fahr above your old existing furnace so that the old funace will only serve as a backup and come on only if needed. The themostat will hookup to the multifueled pellet furnace at different locations subject to what type it is either millivolt (dry contact) or 24 VAC. Check your operator’s manual for hookup locations. Combination Multifuel Pellet-Electric: NOTE: If your old existing furnace fuel is more expensive than electric heat, then you may want to use the Electrical Element Option as a backup. Otherwise you may not need the Optional Electric Element as a backup. The Combination model uses two thermostats, one for Multifuel Pellet and a second for Electric Heating Element. Both must be located at the same height from the floor. If the main thermostat (Multifuel Pellet) calls for heat and that demand is not satisfied with the energy supplied by the Multifuel Pellet, then the optional Electrical Heating unit (Electrical Element) will take over and will maintain the home’s temperature at the setting programmed on the second thermostat e. The Electric Element option thermostat. Each thermostat hooks up to the furnace central processing unit at a different location, check the Operator’s Manual. POWER OUTAGE BACKUP MODULE. A smart item to have as backup in power outages. Use this module for POWER OUTAGES and you can run it from any 12 VOLT BATTERY either a Car battery or a Deep Cycle Battery. It supplies 1000 WATTS of 115 VAC POWER with two outlets and battery cables are supplied. It will will run a variety of devices such as a CORN STOVES, WOOD PELLET STOVES , furnaces, computers, appliances, lights, sump pumps. It even has a USB Type A outlet that allows charging of IPOD’s, Blackberrys, and Cell Phones. SIZE: 10 inches Wide, 5 inches High, 15 inches Long, WEIGHT: 15 lbs. We are a Dealer specializing in corn stoves and can help you through your installation as well as and trouble shooting if necessary. Be careful as others do not have the capability to do that. You will need Duct Back-Draft Dampers. You will need a back-draft damper installed in BOTH this multi-fuel Furnace and your Old furnace. For your Multi-fuel Furnace we sell a 22 x 22′ Back-Damper Frame (see picture) that contains 4 leafs that are gravity-drop. We also sell another set of 4 leafs for your Old Existing Furnace that you can mount just above the furnace in the ductwork. Another option is to have a contractor make one for you. Unless the customer is a technical handyman, he (she) may want to hire a licensed certified HVAC mechanical contractor to install it. You can also hire a sheet metal fabricator to do it. Note: unless you insert back draft dampers for each furnace your system will not work correctly. When one furnace is off, the damper gravity flaps close and prevent back draft from the other existing furnace (when it is running). You can make your own rectangular back-draft damper for both your new and existing furnace out of square aluminum sheet metal flaps that are hinged and drop down with gravity. Do not use gavanized metal for damper blades as it weighs too much. You place this right above the top opening of your existing furnace and when the furnace turns on, the air blows up through the flaps. When the existing furnace shuts off, the gravity flaps fall back down and cover the opening to prevent back draft (from the other furnace). OPERATING AND INSTALLATION INSTRUCTIONS. In the Owner’s Manual is a step by step instruction for installation of this Multi-fuel Furnace as a Primary Furnace located side by side to your Old Furnace. We recommend you run our Multi-fuel as a primary to achieve your desired temperature and use your old furnace as a backup and dial-down the thermostat to your old furnace about 5 Degrees lower than what you are confortable with. Your Old furnace should only fire-up in an emergence back-up role. Do NOT run off the same thermostat as for one to be a backup for the other, then the thermostats have to be set differently. Do NOT get rid of your Old Furnace but keep it as an emergency back-up. Use our Mult-fuel Unit as your primary furnace set to produce heat at 5 Degrees higher than your Old Furnace. Do not use one thermostat for both furnaces. The Multi-fuel Pellet unit must have it’s own thermostat. Those planning on running the Multifuel Pellet Unit as a standalone, are advised to run it one full year in parallel to there old existing furnace so they can become familiar with the multi-fuel furnace and reduce risks. Up-The-Basement-Wall Extension of 6 feet with another 90 turn is available. Inside air is saturated with human-breathed carbon dioxide and your furnace likes oxygen-rich air from the outside. Your multi-fuel furnace will run better with fresh air from the outside. Crushed Oyster Shell sprinkled in the hopper bin facilitates a cleaner burning of corn and helps avoid any Clinker formation. You can also use pelletized lime instead of crushed oyster shell. The unit is NEW in a box/crated pallet. Lumber Yards, Farm Quipment Dealers, and local Manufacturers are good candidates for local businesses. Call for a quote outside of the U. Just a request and a suggestion. The parties waive any other venue to which either party might be entitled by domicile or otherwise. MODELS I, II, and III are available. Heat Output Model III is 120,000 BTU/hr w 240 lbs Hopper Bin, Model II is 105,000 BTU/Hr w 320 lb Hopper Bin, Model I is 80,000 BTU/Hr w 210 lb Hopper Bin. Heat Output is 50,000 to 120,000 BTU/Hr. At a special request a Model IV at 165,000 BTU/Hr is available. Heating Capacity ranging from 2,000 to 4,500 Square Feet, Room Blower G-10 speed 1650 CFM with 1/2 hp motor (max 0.20″ WC), Hot Air Plenum 22″ X 22″ and Cold Air Return Plenum 16-1/8″ x 21-5/16, with size-matching Back-Draft Dampers (Option). Flue Exhaust Pipe 4 diameter. Fresh air 3 diameter. Auto-Ignition, Thermostatic Control Option, 85% Efficient. Electrical 120 VAC, 6 Amps, 60 Hz, a POWER OUTAGE Module is available, Safety Tested and Listed to CAN/CSA B366.1, UL 391, CAN/CSA C22.2 no 236, UL 1995, ASTM E1509, ULC/ORD-C1482. It meets EPA test standard emissions. Cedar Rapids, IA 52405. The item “FORCED-AIR THREE CORN WOOD PELLET MULTIFUEL FURNACE STOVE, 120,000 BTU/Hr” is in sale since Tuesday, November 26, 2013. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners & Heaters\Furnaces & Central Heating Systems”. The seller is “cornstoveiowa” and is located in Cedar Rapids, Iowa. This item can be shipped worldwide.

18000 BTU/HR DC Inverter 15SEER Mini Split Ductless Heat Pump / Air Conditioner


18000 BTU/HR DC Inverter 15SEER Mini Split Ductless Heat Pump / Air Conditioner


18000 BTU/HR DC Inverter 15SEER Mini Split Ductless Heat Pump / Air Conditioner


18000 BTU/HR DC Inverter 15SEER Mini Split Ductless Heat Pump / Air Conditioner


18000 BTU/HR DC Inverter 15SEER Mini Split Ductless Heat Pump / Air Conditioner


Are you looking for a different hvac equipment size or type? All items are 100% brand new & first quality. Fresh from the factory. Ductless mini split system. Please call before ordering. For monthly specials check. You are purchasing a brand. Direct from the factory. 18,000 btu/hr 1.5 ton dc inverter 15seer heat pump ductless mini split system manufactured by klimaire. A scratch or dent item or a discontinued model. As you learn more about this great product, which we are offering at an even more incredible price, we are confident that you will not find a better bargain than this. We have more than 30 years experience in the industry and because of this, we are able to offer you this quality equipment at these affordable prices. Thank you in advance for shopping with us. 15 feet extension kit included. The tubing kit is included with this system. Accessories for this product. Ikm1412f16 – 15 feet. Complete installation kit included. Wafp21 – heavy duty. Universal wall bracket for outdoor units [add $68.00]. Feet complete installation kit upgrade [add $ 69.00]. 1.5 ton (18,000btu/h) dc inverter ductless mini split heat pump 208 / 230 volts high efficiency 15 seer. Soft and individual dehumidifying operation. Removable and washable panel. Multifunction infrared remote control. Auto swing louver with multi position adjustment. Auto diagnostic / auto protection. 3 fan speed for selection. 24 hour on/off timer and clock function. Klimaire’s split system air conditioner can be easily installed in bed rooms, living rooms, dining rooms, patios, car garages, efficiencies, offices, mobile homes, trailer homes, boats, yachts, and more. Split units that are installed in individual rooms have energy consumption considerably low comparing to central systems. Klimaire’s twisted tangential blow system provides extremely silent operation inside. Hand held lcd remote controllers puts the user in control: start/stop, timed programs, temperature settings, fan speed control, air flow direction, and more. A room cooling system, often providing an economical alternative to central systems. Setting your own desired temperature to every zone at your own discretion is one of the main advantages to the central air conditioning systems. Klimaire split systems have a unique dry mode function act like dehumidifier for removal of humidity without cooling the room. This benefit is an ideal solution to remove the humidity during winter reason. As a result of klimaire’s commitment to design, the wall-mounted unit is in constant demand. Starting with the outer housing that incorporates the elegance of smooth lines, understated soft corners and finished in delicate ivory tones, through to physically compact units that discreetly compliment any interior. Engineering is at its highest level of reliability, on-board computer technology has enhanced performance output, and klimaire general leads the way in finished product design. But that is just the start of klimaire’s unbeatable quality. Impressive reliability figures, state of the art technology and a range of features ensure that the user gets the best performance from every air conditioner. These include the newly developed sweep louver configuration, which boosts air flow throughout the room by directing cool air to all corners of the room. High efficiency ultra-quiet, durable rotary compressors for your comfort and low consumption of energy and low amperage at start up. Improved cooling, heating and dehumidification with a 40% larger heat exchanging surface keeping the compact sizes of the fan coil unit. Dc inverter is a type of power conversion circuit that electronically regulates the voltage, current and frequency of a compressor or a motor. Dc inverter-driven air conditioners and heat pumps bear special double cam, twin rotary variable speed compressor. Like a cruise control of a vehicle. Inverter technology varies the compressor speed based on cooling and heating needs in the space. Variable speed enables to precisely match system capacity to actual load. They can slow down or speed up based on demand load. By varying the speed of the compressor systems are able to better match load in heating and cooling. In multi zone inverter systems the indoor units constantly change capacity and electronically communicate with the klimaire outdoor unit to increase or decrease capacity for optimum comfort and save energy. Therefore systems operate more efficiently at light load, while still being capable of increasing the speed to deliver full capacity when needed. Like a cruise control of a vehicle inverter technology varies the compressor speed based on cooling and heating needs in the space. Variable speed enables to precisely match the system capacity to actual load requirements. Instead of shutting off once the desired temperature is reached, it allows the compressor to continue to operate at low speed to maintain the set temperature. Cools and heats up to 800 sq. Electronic remote control with full-function. Quick access, washable air filter. Low ambient heating, down to 5º f. Quick-access, washable air filter. No window space required for installation. Split hvac systems and components are designed to be installed by qualified hvac technicians. The installation of hvac systems includes electrical, gas, and refrigerant connections, is generally regulated by a multiple sets of laws, codes and guidelines, at the federal, state and local levels. Further, the failure to properly install hvac equipment can raise personal safety and performance concerns. As outlined, the failure to comply with this policy could lead to violations of applicable law that are punishable by fines. The indoor unit is hung like a picture frame approximately 6 – 8 feet above the floor usually on an exterior wall. A 2-3 inch hole must be made behind the indoor unit in the exterior wall to run the refrigerant copper tubing; electrical wires and the condensate drain to the outside unit. The indoor unit and outdoor unit are connected to each other by means of refrigerant copper tubing and electrical cables. The condensing unit comes pre-charged with r410a freon however, procedures such as conducting leak tests etc. Are still important steps in ensuring proper functioning of a split ac. Although installation may seem easy to some, certain tools and experience is necessary to complete setup of a mini split. Installing a split ac is easy for any ac company, but can get tricky for a homeowner. Not only are specific tools and knowledge required to complete setup, but installation includes electrical, gas, and refrigerant connections that are often regulated by a set of laws at the state, local and federal level. As a distributor, we cannot encourage a customer or anybody without hvac certification to install a mini split system on their own. However, we have seen many do it in the past successfully. At the same time we have seen some customers install a system unprofessionally without performing all the necessary steps, which resulted in issues within the first few months of operation. In short, you can do all the handyman work yourself and hire an ac company to finish the important – advanced procedures of the installation. For example you can drill the hole in the wall, run the copper lines and connections outside, carefully hang the indoor unit and unpack > place the outdoor unit outside on a concrete pad or flat surface. Then have the hvac contractor complete the steps you can’t perform / don’t have tools for (vacuuming the lines, setting gauges, couplings, releasing refrigerant, testing for leaks etc). Some online retailers will make you believe there package systems are user-friendlier or a ‘plug-n-play’ by marketing the install kits as “quick connect”. But this is not true. Our install kits are flare connects, but this doesn’t mean the difficult steps are somehow skipped. Nor does it guarantee a defect free unit. For example if the copper lines have a small hole and are not tested for leaks, the refrigerant will slowly leak out within 2-3 months, your ac will stop working and you will end up paying $500+ to have the system recharged and lines re-routed for what otherwise would have been a quick free of cost replacement. So it’s worth having it installed the right way. Local hvac companies typically charge by the hour for service and the above-mentioned process should not take more than 1-2 hours (time will vary for each application). But if they install the whole system out of box, the labor charge will of course be higher. Doing the simple steps and leaving the hard stuff for the pros not only guarantees a long-lasting system, but also ensures an energy efficient, effective installation. How the house will look from inside. At quality air equipment your. Satisfaction is our goal. In an effort to achieve this goal, and to serve you better, we have included our store policies. Please take the time to read through them, doing so will ensure your order is processed quickly and correctly. Here’s what we need to know. Step 4: a valid contact telephone number where you can be reached. When the driver delivers your order, it is. That you visually inspect all your items. If the delivered item(s) look to be damaged in anyway please. Take possession of the item(s). If you are unsure that there is damage to any of the wrapped equipment, open it up and inspect it. You sign and accept possession. If only one of your items is damaged then. Only the item that is damaged. Return and / or order cancellation policy. Special order equipment, are not returnable except; “if the equipment do not match the order or the equipment are defective when picked-up or delivered”. Labor is not covered under these warranties! We also offer f. While we acknowledge and applaud do-it-yourselfers, most of the equipment listed should be installed by persons who have the proper expertise, license, and certification to do so. In fact, federal law prohibits anyone from opening a refrigeration system unless they are licensed and certified. Additionally, having a licensed and certified installer that does the work will only help insure years of trouble free operation. We are here to help! At quality air equipment, your complete satisfaction is our number one goal.The item “18000 BTU/HR DC Inverter 15SEER Mini Split Ductless Heat Pump / Air Conditioner” is in sale since Thursday, April 16, 2015. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners”. The seller is “qualityairequipment” and is located in Miami, Florida. This item can be shipped to United States.

  • Brand: Klimaire
  • Model: KSIN018-H215
  • Type: DC Inverter Mini Split Ductless
  • Cooling BTU/Hr: 18000
  • SEER: 15SEER
  • Electric Power: 208 / 230 v