Just another WordPress weblog

21 SEER 24000 BTU Energy Star Ductless Mini Split Air Conditioner Heat 25ft kit


21 SEER 24000 BTU Energy Star Ductless Mini Split Air Conditioner Heat 25ft kit


21 SEER 24000 BTU Energy Star Ductless Mini Split Air Conditioner Heat 25ft kit


21 SEER 24000 BTU Energy Star Ductless Mini Split Air Conditioner Heat 25ft kit


21 SEER 24000 BTU Energy Star Ductless Mini Split Air Conditioner Heat 25ft kit


21 SEER 24000 BTU Energy Star Ductless Mini Split Air Conditioner Heat 25ft kit


21 SEER 24000 BTU Energy Star Ductless Mini Split Air Conditioner Heat 25ft kit


21 SEER 24000 BTU Energy Star Ductless Mini Split Air Conditioner Heat 25ft kit



Thermocore 24000 BTU AC-Heat 19 SEER. 24000 BTU Ductless Mini Split AC: 21 SEER. Inverter w/ 24,000 BTU Heat Pump. GREE Terra Series GREE GWH24TD-D3DNA1A. With a 24000 BTU Inverter Cooling Capacity along with a 24,000 BTU Heat Pump, this 2 TON Energy Star Ductless Split can cool or heat an area over 1200 ft². Advanced INVERTER DC Technology provides both energy efficient operation and low ambient operation start-ups. Additional features include auto-diagnostic functions and sleep mode / 24 hour timer. Comes pre-charged with R410A and includes 25ft install Kit. 24,000 BTU INVERTER Heat Pump. 21 SEER – 9 HSPF – AHRI / ENERGY STAR Certified. Pre-Charged with ECO-Friendly R410A. Indoor Unit – Air Handler. Outdoor Unit – Compressor. Digital Multi-function LCD Remote Control. Installation Kit with 25′ of lineset. Product and Installation Manuals. 21 SEER – 9.0 HSPF – ENERGY STAR. Pre-Charged w/ Eco-friendly R410A Refrigerant. Dry-Mode removes moisture w/o affecting temp. Cross Flow Technology reduces noise output. Compatible with over 5 filtration medias. Freon Leak Detection > Notification system. Gold Fin Condenser Prevents Corrosion. I-FEEL Function tracks Remote Location. Restart IC: Settings restored Following Outage. Cools and Heats down to 5° F Temperatures. 24000 BTU (6826 – 29352 BTU). 25000 BTU (7509 – 37543 BTU). 230 V / 60 Hz, 1Ph. 2000W (cooling) / 2320W (heating). 9.81A (Cooling) / 11.38A (heating). 52/45/38(indoor) / 59dB (outdoor). 38.6 Lbs (Indoor) / 154.5 Lbs (Outdoor). 46.38 x 12.83 x 10.4 in (Indoor Unit) 38.58 x 16.8 x 31.1 in (Outdoor Unit). 98ft (PRECHARGE FOR 25ft). 5 Year on Parts / 7 Years on Compressor. VIEW FULL DETAILED SPECIFICATION SHEET >>>. 25 Feet Flared Copper Tubing. 25 Feet Pipe Insulation. 25 Feet Electrical Wire Harness. Binding Belt – Catchment Trough. Mountung Bracket for Indoor Unit. Extend included 25 foot copper lineset/wire to 50 feet. WHAT IS DC INVERTER? DC Inverter Air Conditioners are the ultimate cooling technology of the HVAC field. They are called “DC inverter” because the alternative current (AC) is converted to Direct Current (DC) then, direct current inverted back to Alternative current with desired frequency. The current supplied through the wall outlet has fixed frequency which is 60 Hertz. Different frequencies supplied to the compressor will result in different running speeds of the compressor. Inverter control systems use Pulse Amplitude Modulation (PAM) that is the most advanced and energy efficient method of inverting the current. DC Inverter AC’s bear special compressors that their speed could be changed by increasing or decreasing the frequency of the supplied power. Therefore, unlike conventional split Air Conditioners Pumps which cycle between on and off repeatedly, the DC Inverter control system will monitor the room temperature and adjust the compressor speed automatically. Conventional compressors turn on and off to maintain the room temperature at desired level. This will result compressor to draw tremendous energy each time it starts up. This will also reduce the life-span of the compressor and other components that are turning on and off. Once a conventional system is running, it runs at its maximum speed, consuming the maximum amount of energy in order to produce the maximum of cooling to maintain the desired temperature. The system will then cycle between on and off in an effort to maintain this temperature. When a DC Inverter compressor initially starts up, it runs with a higher speed to bring the room temperature to desired level rapidly, Once the set temperature is reached, it slows down and adjust its capacity just to counter the heat loss or heat gain of the building. Constant temperature is maintained. BASIC OVERVIEW: The indoor unit is hung like a picture frame approximately 6 – 8 feet above the floor usually on an exterior wall. A 2-3 inch hole must be made behind the indoor unit in the exterior wall to run the refrigerant copper tubing, electrical wires and the condensate drain to the outside unit. The indoor unit and outdoor unit are connected to each other by means of refrigerant copper tubing and electrical cables. The condensing unit comes pre-charged with R410A Freon however, procedures such as conducting leak tests etc. Are still important steps in ensuring proper functioning of a split AC. 7 Year Compressor – 5 Year on all other Parts Registration card will be sent with unit, this card should be completed by an HVAC technician (installer). Installation of a mini split must be completed by a licensed HVAC (Heating, ventilating, & air conditioning) company to ensure any issues encountered in the future are not due to improper installation / workmanship. Even though mini split setup is below the expertise requirements of central AC systems, these are not “plug-n-play” units that can be properly installed without certain tools any prior HVAC – electrical knowledge. The installation includes electrical, gas, and refrigerant connections and generally regulated by a multiple sets of laws, codes and guidelines, at the federal, state and local levels. The failure to properly install HVAC equipment can raise personal safety and performance concerns. If you receive a damaged or defective product, a replacement unit will be sent out Free of cost. SHIPS TO TO BOTH UNITED STATES AND CANADIAN LOCATIONS! SOMEBODY MUST BE ON SITE TO ACCEPT / SIGN FOR Order. Failure to provide valid contact# will delay order. Provides Flat even surface – Avoids debris obstruction. Lineset Extension (1/4 x 3/8). Extend included 16 ft copper lineset to 25ft – 30ft – 40ft – 50ft. Mount your condenser at any height on an outdoor sidewall. Required when mounting air handler on Interior wall. 16/4 Electrical Wire Harness – For Extending Evap. Spare remote controls for the T1 Series Ductless System. Inserts into Filter Screen Slot – Choice of 4 Filtration Medias. Permanently Hard Mounts – Controls Settings w/ Remote. View the Mini Split FAQ >. View the Mini Split Outline Diagram >. The item “21 SEER 24000 BTU Energy Star Ductless Mini Split Air Conditioner Heat 25ft kit” is in sale since Monday, July 28, 2014. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners”. The seller is “thermospace_acs” and is located in Oak Park, Michigan. This item can be shipped to United States, to Canada.

  • Brand: GREE
  • MPN: 24,000 BTU – 2 TON Heat Pump Mitsubishi COMP
  • Type: Split System
  • Cooling BTU/Hr: 24000
  • SEER: 21
  • Energy Star: Compliant
Share and Enjoy:
  • Digg
  • Sphinn
  • del.icio.us
  • Facebook
  • Mixx
  • Google
  • E-mail this story to a friend!
  • Furl
  • LinkedIn
  • Live
  • MySpace
  • Print this article!
  • Propeller
  • Reddit
  • description
  • Slashdot
  • Spurl
  • StumbleUpon
  • Technorati
  • TwitThis
  • YahooMyWeb
NO COMMENTS

Sorry, the comment form is closed at this time.