Just another WordPress weblog

12000 BTU/HR DC Inverter 15SEER Mini Split Ductless Heat Pump / Air Conditioner


12000 BTU/HR DC Inverter 15SEER Mini Split Ductless Heat Pump / Air Conditioner


12000 BTU/HR DC Inverter 15SEER Mini Split Ductless Heat Pump / Air Conditioner


12000 BTU/HR DC Inverter 15SEER Mini Split Ductless Heat Pump / Air Conditioner


12000 BTU/HR DC Inverter 15SEER Mini Split Ductless Heat Pump / Air Conditioner


Are you looking for a different hvac equipment size or type? Dc inverter 15seer 110-120v. Ductless mini split system. Please call before ordering. For monthly specials check. You are purchasing a brand. Direct from the factory. 12000 btu/hr 1 ton dc inverter 15seer heat pump ductless mini split system manufactured by klimaire. A scratch or dent item or a discontinued model.

As you learn more about this great product, which we are offering at an even more incredible price, we are confident that you will not find a better bargain than this. We have more than 30 years experience in the industry and because of this, we are able to offer you this quality equipment at these affordable prices. Thank you in advance for shopping with us. 15 feet extension kit included.

The tubing kit is included with this system. Ikm1412f16 – 15 feet.

Complete installation kit included [$0.00]. Wafp21 – heavy duty. Universal wall bracket for outdoor units [add $68.00]. Ik1412f35-c36 – 35 feet complete installation kit upgrade [add $245.00].

Feet complete installation kit upgrade [add $69.00]. 1 ton (12,000btu/h) dc inverter ductless mini split heat pump 110-120 volts high efficiency 15 seer. Soft and individual dehumidifying operation. Removable and washable panel.

Multifunction infrared remote control. Auto swing louver with multi position adjustment. Auto diagnostic / auto protection. 3 fan speed for selection. 24 hour on/off timer and clock function.

Klimaire’s split system air conditioner can be easily installed in bed rooms, living rooms, dining rooms, patios, car garages, efficiencies, offices, mobile homes, trailer homes, boats, yachts, and more. Split units that are installed in individual rooms have energy consumption considerably low comparing to central systems. Klimaire’s twisted tangential blow system provides extremely silent operation inside. Hand held lcd remote controllers puts the user in control: start/stop, timed programs, temperature settings, fan speed control, air flow direction, and more.

A room cooling system, often providing an economical alternative to central systems. Setting your own desired temperature to every zone at your own discretion is one of the main advantages to the central air conditioning systems.

Klimaire split systems have a unique dry mode function act like dehumidifier for removal of humidity without cooling the room. This benefit is an ideal solution to remove the humidity during winter reason. As a result of klimaire’s commitment to design, the wall-mounted unit is in constant demand. Starting with the outer housing that incorporates the elegance of smooth lines, understated soft corners and finished in delicate ivory tones, through to physically compact units that discreetly compliment any interior. Engineering is at its highest level of reliability, on-board computer technology has enhanced performance output, and klimaire general leads the way in finished product design. But that is just the start of klimaire’s unbeatable quality. Impressive reliability figures, state of the art technology and a range of features ensure that the user gets the best performance from every air conditioner. These include the newly developed sweep louver configuration, which boosts air flow throughout the room by directing cool air to all corners of the room. High efficiency ultra-quiet, durable rotary compressors for your comfort and low consumption of energy and low amperage at start up. Improved cooling, heating and dehumidification with a 40% larger heat exchanging surface keeping the compact sizes of the fan coil unit. Dc inverter is a type of power conversion circuit that electronically regulates the voltage, current and frequency of a compressor or a motor. Dc inverter-driven air conditioners and heat pumps bear special double cam, twin rotary variable speed compressor. Like a cruise control of a vehicle.

Inverter technology varies the compressor speed based on cooling and heating needs in the space. Variable speed enables to precisely match system capacity to actual load. They can slow down or speed up based on demand load. By varying the speed of the compressor systems are able to better match load in heating and cooling. In multi zone inverter systems the indoor units constantly change capacity and electronically communicate with the klimaire outdoor unit to increase or decrease capacity for optimum comfort and save energy.

Therefore systems operate more efficiently at light load, while still being capable of increasing the speed to deliver full capacity when needed. Like a cruise control of a vehicle inverter technology varies the compressor speed based on cooling and heating needs in the space. Variable speed enables to precisely match the system capacity to actual load requirements. Instead of shutting off once the desired temperature is reached, it allows the compressor to continue to operate at low speed to maintain the set temperature. Cools and heats up to 600 sq.

Electronic remote control with full-function. Quick access, washable air filter. Low ambient heating, down to 5º f. Quick-access, washable air filter. No window space required for installation. Split hvac systems and components are designed to be installed by qualified hvac technicians. The installation of hvac systems includes electrical, gas, and refrigerant connections, is generally regulated by a multiple sets of laws, codes and guidelines, at the federal, state and local levels. Further, the failure to properly install hvac equipment can raise personal safety and performance concerns. As outlined, the failure to comply with this policy could lead to violations of applicable law that are punishable by fines. The indoor unit is hung like a picture frame approximately 6 – 8 feet above the floor usually on an exterior wall. A 2-3 inch hole must be made behind the indoor unit in the exterior wall to run the refrigerant copper tubing; electrical wires and the condensate drain to the outside unit. The indoor unit and outdoor unit are connected to each other by means of refrigerant copper tubing and electrical cables.

The condensing unit comes pre-charged with r410a freon however, procedures such as conducting leak tests etc. Are still important steps in ensuring proper functioning of a split ac. Although installation may seem easy to some, certain tools and experience is necessary to complete setup of a mini split. Installing a split ac is easy for any ac company, but can get tricky for a homeowner.

Not only are specific tools and knowledge required to complete setup, but installation includes electrical, gas, and refrigerant connections that are often regulated by a set of laws at the state, local and federal level. As a distributor, we cannot encourage a customer or anybody without hvac certification to install a mini split system on their own. However, we have seen many do it in the past successfully. At the same time we have seen some customers install a system unprofessionally without performing all the necessary steps, which resulted in issues within the first few months of operation. In short, you can do all the handyman work yourself and hire an ac company to finish the important – advanced procedures of the installation. For example you can drill the hole in the wall, run the copper lines and connections outside, carefully hang the indoor unit and unpack > place the outdoor unit outside on a concrete pad or flat surface. Then have the hvac contractor complete the steps you can’t perform / don’t have tools for (vacuuming the lines, setting gauges, couplings, releasing refrigerant, testing for leaks etc). Some online retailers will make you believe there package systems are user-friendlier or a ‘plug-n-play’ by marketing the install kits as “quick connect”. But this is not true.

Our install kits are flare connects, but this doesn’t mean the difficult steps are somehow skipped. Nor does it guarantee a defect free unit. For example if the copper lines have a small hole and are not tested for leaks, the refrigerant will slowly leak out within 2-3 months, your ac will stop working and you will end up paying $500+ to have the system recharged and lines re-routed for what otherwise would have been a quick free of cost replacement.

So it’s worth having it installed the right way. Local hvac companies typically charge by the hour for service and the above-mentioned process should not take more than 1-2 hours (time will vary for each application).

But if they install the whole system out of box, the labor charge will of course be higher. Doing the simple steps and leaving the hard stuff for the pros not only guarantees a long-lasting system, but also ensures an energy efficient, effective installation. How the house will look from inside. At quality air equipment your. Satisfaction is our goal. In an effort to achieve this goal, and to serve you better, we have included our store policies. Please take the time to read through them, doing so will ensure your order is processed quickly and correctly.

Here’s what we need to know. Step 4: a valid contact telephone number where you can be reached.

When the driver delivers your order, it is. That you visually inspect all your items. If the delivered item(s) look to be damaged in anyway please. Take possession of the item(s).

If you are unsure that there is damage to any of the wrapped equipment, open it up and inspect it. You sign and accept possession. If only one of your items is damaged then.

Only the item that is damaged. Return and / or order cancellation policy. Special order equipment, are not returnable except; “if the equipment do not match the order or the equipment are defective when picked-up or delivered”. Labor is not covered under these warranties! We also offer f.

While we acknowledge and applaud do-it-yourselfers, most of the equipment listed should be installed by persons who have the proper expertise, license, and certification to do so. In fact, federal law prohibits anyone from opening a refrigeration system unless they are licensed and certified.

Additionally, having a licensed and certified installer that does the work will only help insure years of trouble free operation. We are here to help! At quality air equipment, your complete satisfaction is our number one goal.

The item “12000 BTU/HR DC Inverter 15SEER Mini Split Ductless Heat Pump / Air Conditioner” is in sale since Monday, November 24, 2014. This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Air Conditioners”.

The seller is “qualityairequipment” and is located in Miami, Florida. This item can be shipped to United States.

  • Brand: Klimaire
  • Model: KSIN012-H115
  • Type: DC Inverter Mini Split Ductless
  • Cooling BTU/Hr: 12000
  • SEER: 15SEER
  • Electric Power: 110-120v
Share and Enjoy:
  • Digg
  • Sphinn
  • del.icio.us
  • Facebook
  • Mixx
  • Google
  • E-mail this story to a friend!
  • Furl
  • LinkedIn
  • Live
  • MySpace
  • Print this article!
  • Propeller
  • Reddit
  • description
  • Slashdot
  • Spurl
  • StumbleUpon
  • Technorati
  • TwitThis
  • YahooMyWeb
NO COMMENTS

Sorry, the comment form is closed at this time.